text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
  1. Kezdőlap
  2. Catalogue
  3. CMM

CMM

Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
Azonosító: FX-CTSML
Ár:  $39.00
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Part Number:  FX-CTSML
  • Thread:  Without Thread
Raktáron - Kiszállítás 1-2 napon belül
Kinematic Fixture Plate 500x500 mm (Plain)
Kinematic Fixture Plate 500x500 mm (Plain)
Azonosító: KPP-500__500
Ár:  $968.00
Gyors áttekintés:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Part Number:  KPP-500/500
  • Plate Compatibility :  KB-400/400, KB-UNIVL
Raktáron - Kiszállítás 1-2 napon belül
Spring Clamp (M8)
Spring Clamp (M8)
Azonosító: FX-SPRING
Ár:  $57.00
Gyors áttekintés:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Part Number:  FX-SPRING
  • Thread:  Without Thread
Raktáron - Kiszállítás 1-2 napon belül
Kinematic Fixture Plate 300x300 mm (Plain)
Kinematic Fixture Plate 300x300 mm (Plain)
Azonosító: KPP-300__300
Ár:  546,00 €
Gyors áttekintés:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Part Number:  KPP-300/300
  • Plate Compatibility :  KB-250/250, KB-UNIVL
Raktáron - Kiszállítás 1-2 napon belül
Thumb Screw M8
Thumb Screw M8
Azonosító: FX-THUMB
Ár:  11,00 €
Gyors áttekintés:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Part Number:  FX-THUMB
  • Thread:  M8
Raktáron - Kiszállítás 1-2 napon belül
Vee Block Twin
Vee Block Twin
Azonosító: FV-VEETWIN
Ár:  47,00 €
Gyors áttekintés:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Part Number:  FV-VEETWIN
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
Azonosító: FV-SO8__20
Ár:  10,00 €
Gyors áttekintés:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/20
  • Length:  20 mm
  • Diameter:  8 mm
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
Azonosító: FX-SO16__20
Ár:  18,00 €
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/20
  • Length:  20 mm
  • Diameter:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Cone Adjustable (M4)
Cone Adjustable (M4)
Azonosító: FV-CONEADJ
Ár:  22,00 €
Gyors áttekintés:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Part Number:  FV-CONEADJ
  • Thread:  M4
Raktáron - Kiszállítás 1-2 napon belül
Hinge Pivot With Handle
Hinge Pivot With Handle
Azonosító: FX-PR30HINGE
Ár:  84,00 €
Gyors áttekintés:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Part Number:  FX-PR30HINGE
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
Azonosító: FX-CTMED
Ár:  33,00 €
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Part Number:  FX-CTMED
  • Thread:  Without Thread
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
Azonosító: FX-SO16__100
Ár:  26,00 €
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/100
  • Length:  100 mm
  • Diameter:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
Azonosító: FX-BP300__300
Ár:  819,00 €
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP300/300
  • Thread:  M8
Raktáron - Kiszállítás 1-2 napon belül
Spring Nut (M8)
Spring Nut (M8)
Azonosító: FX-M8SPRGNUT
Ár:  33,00 €
Gyors áttekintés:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Part Number:  FX-M8SPRGNUT
Raktáron - Kiszállítás 1-2 napon belül
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
Azonosító: FX-SUB45__120
Ár:  60,00 €
Gyors áttekintés:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Part Number:  FX-SUB45/120
  • Size:  120 x 45 x 12 mm
Raktáron - Kiszállítás 1-2 napon belül
Support Stop
Support Stop
Azonosító: FX-SUP__STOP
Ár:  87,00 €
Gyors áttekintés:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Part Number:  FX-SUP/STOP
  • Thread:  M8
Raktáron - Kiszállítás 1-2 napon belül
Kinematic Fixture Plate 300x300x16 mm (M8)
Kinematic Fixture Plate 300x300x16 mm (M8)
SKU: KPT-300__300
Price:  880,00 €
Quick overview:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Part Number:  KPT-300/300
  • Plate Compatibility :  KB-250/250, KB-UNIVL
In Stock
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
SKU: FV-LATSML
Price:  39,00 €
Quick overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Part Number:  FV-LATSML
  • Length:  10 mm
  • Diameter:  8 mm
In Stock
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
SKU: FX-LATMED
Price:  58,00 €
Quick overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Part Number:  FX-LATMED
  • Length:  20 mm
  • Diameter:  16 mm
In Stock
Pillar 30x30x150mm
Pillar 30x30x150mm
SKU: FX-PR30__150
Price:  43,00 €
Quick overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/150
  • Size:  30 x 30 x 150 mm
In Stock