text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
SWIFT-SET
ID: GB-0122-1000
Precio:  zł2,801,500.00
  • Kompatybilność:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  zł265,496.00
Resumen:  Adapter to allow X1 styli builds
  • Kompatybilność:  HP-S-X1 Stylus Clampings
  • Średnica:  60mm
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  zł228,861.00
  • Kompatybilność:  HP-S-X3 Stylus Clampings
  • Średnica:  40mm
Existencias disponibles - Envío en 1-2 días
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  zł15,085.00
Resumen:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Precio:  zł848,208.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
Existencias disponibles - Envío en 1-2 días
Centering Pin
ID: FV-MALE
Precio:  zł9,913.00
Resumen:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Gwint:  M4
Existencias disponibles - Envío en 1-2 días
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Precio:  zł884,412.00
Resumen:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Gwint:  M4
  • Zastosowanie:  Multisensor CMM
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Precio:  zł1,199,904.00
Resumen:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne ramiona pomiarowe
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M8)
ID: FX-SPRING
Precio:  zł23,705.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Thumb Screw M8
ID: FX-THUMB
Precio:  zł4,310.00
Resumen:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Gwint:  M8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  zł7,758.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  20mm
  • Średnica:  16mm
Existencias disponibles - Envío en 1-2 días
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  zł23,274.00
Resumen:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  £20.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  100mm
  • Średnica:  16mm
Existencias disponibles - Envío en 1-2 días
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Precio:  £47.00
Resumen:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Wymiar:  120 x 45 x 12 mmmm
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Precio:  £944.00
Resumen:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne ramiona pomiarowe
Existencias disponibles - Envío en 1-2 días
Support Stop
ID: FX-SUP__STOP
Precio:  £72.00
Resumen:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Gwint:  M8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Precio:  £14.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  20mm
  • Średnica:  20mm
Existencias disponibles - Envío en 1-2 días
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Precio:  £21.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  100mm
  • Średnica:  20mm
Existencias disponibles - Envío en 1-2 días
Swift-Fix Tool Kit
ID: FX-TOOLS
Precio:  £22.00
Resumen:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
Existencias disponibles - Envío en 1-2 días
Standoff Support (M8)
ID: FX-SO__SUPP
Precio:  £17.00
Resumen:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Długość:  10mm
  • Średnica:  15mm
Existencias disponibles - Envío en 1-2 días