text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Prijs:  €5,270.00
Beknopt overzicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • CMM Compatibility:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software Compatibility:  PC-DMIS (V2016 onwards), QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Artefacts Dimensions:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  €900.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70mm
  • Klembereik buitenzijde (A):  1 - 71mm
  • Klembereik binnenzijde (I):  18 - 66mm
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Prijs:  €6,500.00
Beknopt overzicht:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibiliteit:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 300x300mm (Plain)
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Prijs:  €495.00
Beknopt overzicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Basisplaat comptabiliteit:  KB-250/250, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  €884.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad / Verbinding:  M8
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Fixture Plate 500x500mm (Plain)
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Prijs:  €758.00
Beknopt overzicht:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Basisplaat comptabiliteit:  KB-400/400, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  €31.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Vee Locator
Vee Locator
ID: FV-FEMALE
Prijs:  €25.00
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  €42.00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prijs:  €48.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prijs:  €9.00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Schroefdraad / Verbinding:  M8
Op voorraad – Verzendtijd 1-2 dagen
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  €236.00
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Basisplaat comptabiliteit:  FV-200-200C, FV-200/200F, FV-200/200P
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  €9.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20mm
  • Diameter:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  €14.00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Schroefdraad / Verbinding:  M4
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prijs:  €16.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20mm
  • Diameter:  16mm
Op voorraad – Verzendtijd 1-2 dagen
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  €47.00
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  €31.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  €695.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad / Verbinding:  M8
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prijs:  €23.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  100mm
  • Diameter:  16mm
Op voorraad – Verzendtijd 1-2 dagen
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  €31.00
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Op voorraad – Verzendtijd 1-2 dagen