Trainings

Target Group

Measuring machine operators and measuring machine programmers, as well as those who wish to strengthen their basic knowledge in the PC-DMIS software.

Course Goals

To provide the basic knowledge required to start using PC-DMIS.

Prerequisites

Computer literacy and basic knowledge in reading technical drawings.

Additional Information

Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

Target Group
Engineers and Designers
Course Goals
To provide in-depth knowledge about form and position tolerances, notation, and setting requirements.​​​​​​​
Prerequisites
Basic knowledge in reading technical drawings.
Other Information
To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

Target Group
Anyone who needs basic knowledge in reading technical drawings or needs to refresh their skills in reading technical drawings.
Course Goals
To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites
No special prerequisites are required other than computer literacy.
Other Information
To complete the course, you need access to a computer and the internet.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

Target Audience: Those who need insight into form and position tolerances, such as designers, planners, production technicians, CMM operators, buyers, and salespeople.
Course Objectives: To provide insight into standards for form and position tolerances, notation, and what the requirements entail.
Prerequisites: Basic knowledge of technical drawing reading, computer literacy.
Additional Information: To complete the course, you need access to a computer and the internet. 

For more information: Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

Target Group

New users of portable equipment with PC-DMIS, as well as those who wish to strengthen their basic knowledge in the PC-DMIS software.

Course Goals

To provide the basic knowledge required to use PC-DMIS with portable equipment.

Prerequisites

Computer literacy and basic knowledge in reading technical drawings.

Additional Information

Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

Target Group
New users of measuring arms with PC-DMIS Laser, as well as those who wish to strengthen their basic knowledge in laser scanning.
Course Goals
To provide the basic knowledge required to use laser scanning with the measuring arm in the PC-DMIS software.
Prerequisites
Computer literacy, basic knowledge in reading technical drawings, and basic knowledge of PC-DMIS Measuring Arm.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

Target Group
Individuals who need basic knowledge in reading technical drawings.
Course Goals
To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites
No special prerequisites are required.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

Target Group
Anyone who needs basic knowledge in measurement with hand measuring tools. Aspiring workshop technicians, machine operators, inspectors, and metrologists.
Course Goals
To provide basic knowledge to build upon in the field of workshop metrology.
Prerequisites
No special prerequisites are required.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

Target Group
Anyone who needs basic knowledge in reading technical drawings and measurement with hand measuring tools. Aspiring workshop technicians, machine operators, inspectors, and metrologists.
Course Goals
To provide basic knowledge to build upon in the areas of reading technical drawings and workshop metrology.
Prerequisites
No special prerequisites are required.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com

Target Group
Metrologists, quality control planners, measuring machine programmers, and designers.
Course Goals
To provide in-depth knowledge about form and position tolerances, notation, the meaning of the requirements, and how the requirements can be evaluated.
Prerequisites
Basic knowledge in reading technical drawings. Experience in design or as a user or programmer of measuring machines.
Other Information
To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information
Contact us by phone at 016-16 08 05 or via email at training.se@hexagon.com