text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prijs:  550,00 €
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
Op voorraad – Verzendtijd 1-2 dagen
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prijs:  21,00 €
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetage:  M4
Op voorraad – Verzendtijd 1-2 dagen
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prijs:  580,00 €
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  900,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  70mm
  • Plage de serrage extérieur (A):  1 - 71mm
  • Plage de serrage intérieur (I):  18 - 66mm
  • Matériau:  Acier inoxydable
  • Fixation (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  910,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diamètre extérieur du mandrin (D1):  70mm
  • Plage de serrage extérieur (A):  1 - 71mm
  • Plage de serrage intérieur (I):  18 - 66mm
  • Matériau:  Acier inoxydable
  • Fixation:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  10,00 €
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  25mm
  • Diamètre:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Prijs:  26,00 €
Beknopt overzicht:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Filetage:  M8
Op voorraad – Verzendtijd 1-2 dagen
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  17,00 €
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longueur:  6mm
  • Diamètre:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prijs:  1 030,00 €
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Op voorraad – Verzendtijd 1-2 dagen
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prijs:  49,00 €
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  82,00 €
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prijs:  €25.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  100mm
  • Diamètre:  16mm
Op voorraad – Verzendtijd 1-2 dagen
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prijs:  €58.00
Beknopt overzicht:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Taille:  120 x 45 x 12 mmmm
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prijs:  €1,160.00
Beknopt overzicht:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Op voorraad – Verzendtijd 1-2 dagen
Support Stop
Support Stop
ID: FX-SUP__STOP
Prijs:  €84.00
Beknopt overzicht:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Filetage:  M8
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Prijs:  €17.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20mm
  • Diamètre:  20mm
Op voorraad – Verzendtijd 1-2 dagen
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Prijs:  €407.00
Beknopt overzicht:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Filetage:  M4
Op voorraad – Verzendtijd 1-2 dagen
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Prijs:  €18.00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Filetage:  M8
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Prijs:  €2,470.00
Beknopt overzicht:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Op voorraad – Verzendtijd 1-2 dagen
Kinematic Support Kit
Kinematic Support Kit
ID: FX-KINKIT
Prijs:  €254.00
Beknopt overzicht:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
Op voorraad – Verzendtijd 1-2 dagen