Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

Kinematic Fixture Plate 300x300mm (Plain)
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Price:  €495.00
Quick Overview:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plate Compatibility:  KB-250/250, KB-UNIVL
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Price:  €884.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread / Connection:  M8
In Stock - Despatched 1-2 Days
Kinematic Fixture Plate 500x500mm (Plain)
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Price:  €758.00
Quick Overview:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plate Compatibility:  KB-400/400, KB-UNIVL
In Stock - Despatched 1-2 Days
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Price:  €31.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Vee Locator
Vee Locator
ID: FV-FEMALE
Price:  €25.00
Quick Overview:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
In Stock - Despatched 1-2 Days
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Price:  €42.00
Quick Overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In Stock - Despatched 1-2 Days
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Price:  €48.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Price:  €9.00
Quick Overview:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Thread / Connection:  M8
In Stock - Despatched 1-2 Days
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Price:  €236.00
Quick Overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Plate Compatibility:  FV-200-200C, FV-200/200F, FV-200/200P
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Price:  €9.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  8mm
In Stock - Despatched 1-2 Days
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Price:  €14.00
Quick Overview:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Thread / Connection:  M4
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Price:  €16.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  16mm
In Stock - Despatched 1-2 Days
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Price:  €47.00
Quick Overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In Stock - Despatched 1-2 Days
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Price:  €31.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Price:  €695.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread / Connection:  M8
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Price:  €23.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  100mm
  • Diameter:  16mm
In Stock - Despatched 1-2 Days
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Price:  €31.00
Quick Overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
In Stock - Despatched 1-2 Days
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Price:  €54.00
Quick Overview:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Size:  120 x 45 x 12 mmmm
In Stock - Despatched 1-2 Days
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Price:  €1,095.00
Quick Overview:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Thread / Connection:  M8
  • Application:  CMM, Portable Measuring Arm
In Stock - Despatched 1-2 Days
Support Stop
Support Stop
ID: FX-SUP__STOP
Price:  €83.00
Quick Overview:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Thread / Connection:  M8
In Stock - Despatched 1-2 Days