text.skipToContent text.skipToNavigation
V rámci našich nových inovací zabezpečení budete požádáni o obnovení hesla
Vee Locator
Kód produktu: FV-FEMALE
Cena:  £29.00
Rychlý přehled:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Skladem – doba odeslání 1-2 dny
Vee Block Twin
Kód produktu: FV-VEETWIN
Cena:  £42.00
Rychlý přehled:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Skladem – doba odeslání 1-2 dny
Guide Rail (L = 480 mm)
Kód produktu: FV-GUIDE480
Cena:  £231.00
Rychlý přehled:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Kompatibilita desek :  FV-200-200C, FV-200/200F, FV-200/200P
Skladem – doba odeslání 1-2 dny
Centering Pin
Kód produktu: FV-MALE
Cena:  £21.00
Rychlý přehled:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Závi:  M4
Skladem – doba odeslání 1-2 dny
Swift-Fix Vision - Starter Kit
Kód produktu: FV-STARTERKIT
Cena:  £1,036.00
Rychlý přehled:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Závi:  M4
  • Určeno pro:  Multisensor CMM
Skladem – doba odeslání 1-2 dny
Standoff (D = 8 mm / L = 15 mm)
Kód produktu: FV-SO8__15
Cena:  £9.00
Rychlý přehled:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Délka:  15
  • Průměr:  8
Skladem – doba odeslání 1-2 dny
Swift-Fix Vision - Full Kit
Kód produktu: FV-FULLKIT
Cena:  £2,091.00
Rychlý přehled:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Závi:  M4
  • Určeno pro:  Multisensor CMM
Skladem – doba odeslání 1-2 dny
Flexible Vice
Kód produktu: FV-SLIDE
Cena:  £370.00
Rychlý přehled:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Závi:  M4
Skladem – doba odeslání 1-2 dny
Standoff Pin (D = 8 mm / L = 10 mm)
Kód produktu: FV-SO__PIN
Cena:  £16.00
Rychlý přehled:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Délka:  10
  • Průměr:  8
Skladem – doba odeslání 1-2 dny
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
Kód produktu: FC-70SS3-NF
Cena:  £818.00
Rychlý přehled:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Vnější průměr sklíčidla (D1):  70
  • Vnější upínací rozsah (A):  1 - 71
  • Vnitřní upínací rozsah (I):  18 - 66
  • Materiál:  Nerezová ocel
  • Upevnění (G):  M3
Skladem – doba odeslání 1-2 dny
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
Kód produktu: FC-70SS3
Cena:  £827.00
Rychlý přehled:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Vnější průměr sklíčidla (D1):  70
  • Vnější upínací rozsah (A):  1 - 71
  • Vnitřní upínací rozsah (I):  18 - 66
  • Materiál:  Nerezová ocel
  • Upevnění:  M4 / M8
Skladem – doba odeslání 1-2 dny
Fixture Baseplate 300x400x12mm (M8)
Kód produktu: FX-BP300__400
Cena:  £818.00
Rychlý přehled:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Závi:  M8
Skladem – doba odeslání 1-2 dny
Tension Clamp (L = 39 mm)
Kód produktu: FX-CTSML
Cena:  £29.00
Rychlý přehled:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Skladem – doba odeslání 1-2 dny
Spring Clamp (M8)
Kód produktu: FX-SPRING
Cena:  £45.00
Rychlý přehled:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Skladem – doba odeslání 1-2 dny
Thumb Screw M8
Kód produktu: FX-THUMB
Cena:  £9.00
Rychlý přehled:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Závi:  M8
Skladem – doba odeslání 1-2 dny
Standoff (D = 16 mm / L = 20 mm)
Kód produktu: FX-SO16__20
Cena:  £15.00
Rychlý přehled:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Délka:  20
  • Průměr:  16
Skladem – doba odeslání 1-2 dny
Hinge Pivot With Handle
Kód produktu: FX-PR30HINGE
Cena:  £75.00
Rychlý přehled:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Skladem – doba odeslání 1-2 dny
Tension Clamp (L = 66 mm)
Kód produktu: FX-CTMED
Cena:  £29.00
Rychlý přehled:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Skladem – doba odeslání 1-2 dny
Fixture Baseplate 300x300x12mm (M8)
Kód produktu: FX-BP300__300
Cena:  £682.00
Rychlý přehled:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Závi:  M8
Skladem – doba odeslání 1-2 dny
Standoff (D = 16 mm / L = 100 mm)
Kód produktu: FX-SO16__100
Cena:  £23.00
Rychlý přehled:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Délka:  100
  • Průměr:  16
Skladem – doba odeslání 1-2 dny