text.skipToContent text.skipToNavigation

W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła

MMC

Znaleziono 111 produkt(y/ów)

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)

ID: I00000005

Cena: 159 039,00 zł

Comptabilité: Absolute Arm RA7
Type de prise: ODU
USB / LAN: LAN
Compatibilité du scanner: RS3
Tensio: 2 255V

W magazynie — wysyłka 1–2 dni

Single-CMM Dryer / Filter (110 V)

ID: H007622

Cena:

Szybki podgląd: Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Inlet Flow: 566 L/M [20 CFM] @ 6.9 bar [100 PSI]
Max. Outlet Flow: 473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
Sweep Air Flow: 94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
Max. Air Temperature: 37° C [100° F]
Poids: 5,7kg

W magazynie — wysyłka 1–2 dni

Multi-CMM Dryer / Filter (110 V)

ID: H007621

Cena:

Szybki podgląd: Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Pressure: 12bar
Min. Pressure: 6,9bar
Poids: 25kg

W magazynie — wysyłka 1–2 dni

Maintenance Kit (Single-CMM)

ID: H007624

Cena:

Szybki podgląd: Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.

Compatibilité du système: Single-CMM Dryer / Filter (110 V) / SKU: H007622
Poids: 0,181kg

W magazynie — wysyłka 1–2 dni

Upgrade from Filter only to Dryer / Filter

ID: H007626

Cena:

Szybki podgląd: The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.

Compatibilité du système: H007623 SINGLE-CMM FILTER ONLY (110V)
Poids: 1,724kg

W magazynie — wysyłka 1–2 dni

Maintenance Kit (Multi-CMM)

ID: H007625

Cena:

Szybki podgląd: Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.

Compatibilité du système: Multi-CMM Dryer / Filter (110 V) / SKU: H007621
Poids: 0,363kg

W magazynie — wysyłka 1–2 dni

Single-CMM Filter only (110 V)

ID: H007623

Cena:

Szybki podgląd: The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.

Poids: 3,72kg

W magazynie — wysyłka 1–2 dni

SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Cena: 2 430,00 zł

Szybki podgląd: Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Comptabilité: HP-S-X1 Stylus Clampings
Diamètre: 60mm

W magazynie — wysyłka 1–2 dni

SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Cena: 2 097,00 zł

Szybki podgląd: Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Comptabilité: HP-S-X3 Stylus Clampings
Diamètre: 40mm

W magazynie — wysyłka 1–2 dni

Spring Clamp (M8)

ID: FX-SPRING

Cena: 48,00 CHF

Szybki podgląd: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

W magazynie — wysyłka 1–2 dni

Thumb Screw M8

ID: FX-THUMB

Cena: 9,00 CHF

Szybki podgląd: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Filetage: M8

W magazynie — wysyłka 1–2 dni

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Cena: zł72.00

Szybki podgląd: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20mm
Diamètre: 16mm

W magazynie — wysyłka 1–2 dni

Pillar Top Plate (10 x M8)

ID: FX-SUB45__120

Cena: zł243.00

Szybki podgląd: The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.

Taille: 120 x 45 x 12 mmmm

W magazynie — wysyłka 1–2 dni

Support Stop

ID: FX-SUP__STOP

Cena: zł373.50

Szybki podgląd: The support stop allows the user to apply a positive clamping force with variable pressure.

Filetage: M8

W magazynie — wysyłka 1–2 dni

Spring Pusher Standoff Clamp (D=16mm / L=20mm)

ID: FX-LATMED

Cena: zł189.00

Szybki podgląd: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Longueur: 20mm
Diamètre: 16mm

W magazynie — wysyłka 1–2 dni

Pillar 30x30x150mm

ID: FX-PR30__150

Cena: zł184.50

Szybki podgląd: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Taille: 30 x 30 x 150mm

W magazynie — wysyłka 1–2 dni

Standoff (D = 20 mm / L = 20 mm)

ID: FX-SO20__20

Cena: zł72.00

Szybki podgląd: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20mm
Diamètre: 20mm

W magazynie — wysyłka 1–2 dni

Tension Post (M8)

ID: FX-POST

Cena: zł112.50

Szybki podgląd: This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.

Filetage: M8

W magazynie — wysyłka 1–2 dni

Standoff (D = 20 mm / L = 100 mm)

ID: FX-SO20__100

Cena: zł108.00

Szybki podgląd: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 100mm
Diamètre: 20mm

W magazynie — wysyłka 1–2 dni

Swift-Fix Tool Kit

ID: FX-TOOLS

Cena: zł112.50

Szybki podgląd: The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.

W magazynie — wysyłka 1–2 dni

Dodano do koszyka.

Previous
1(current)
2
3
4
5
Next

Dostępność produktu według lokalizacji sklepu

Godziny