text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: H007624
Prijs: 
Beknopt overzicht:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • Compatibilité du système:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Poids:  0.181kg
Op voorraad – Verzendtijd 1-2 dagen
ID: I00000005
Prijs:  CHF 424,35
  • Comptabilité:  Absolute Arm RA7
  • Type de prise:  ODU
  • USB / LAN:  LAN
  • Compatibilité du scanner:  RS3
  • Tensio:  2255V
Op voorraad – Verzendtijd 1-2 dagen
ID: H007625
Prijs: 
Beknopt overzicht:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • Compatibilité du système:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Poids:  0.363kg
Op voorraad – Verzendtijd 1-2 dagen
ID: H007622
Prijs: 
Beknopt overzicht:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Poids:  5.7kg
Op voorraad – Verzendtijd 1-2 dagen
ID: H007621
Prijs: 
Beknopt overzicht:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12bar
  • Min. Pressure:  6.9bar
  • Poids:  25kg
Op voorraad – Verzendtijd 1-2 dagen
ID: H007623
Prijs: 
Beknopt overzicht:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Poids:  3.720kg
Op voorraad – Verzendtijd 1-2 dagen
ID: H007626
Prijs: 
Beknopt overzicht:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • Compatibilité du système:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Poids:  1.724kg
Op voorraad – Verzendtijd 1-2 dagen
ID: GB0122-0019
Prijs:  CHF 466,00
Beknopt overzicht:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40mm
Op voorraad – Verzendtijd 1-2 dagen
ID: GB0122-0008
Prijs:  CHF 540,00
Beknopt overzicht:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-THUMB
Prijs:  CHF 9,00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetage:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: KPT-500__500
Prijs:  CHF 1.780,00
Beknopt overzicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plaque adaptable:  KB-400/400, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
ID: KPT-400__400
Prijs:  CHF 1.316,00
Beknopt overzicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plaque adaptable:  KB-300/300, KB-UNIVL
Op voorraad – Verzendtijd 1-2 dagen
ID: KB-UNIVL
Prijs:  CHF 589,00
Beknopt overzicht:  The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
  • Plaque adaptable:  KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO__SUPP
Prijs:  CHF 20,00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longueur:  10mm
  • Diamètre:  15mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SUP__STOP
Prijs:  CHF 83,00
Beknopt overzicht:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Filetage:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-PR30__50
Prijs:  CHF 36,00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 50mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-PLUNGER
Prijs:  CHF 91,00
Beknopt overzicht:  The spring plunger exerts low forces to hold sensible parts in position.
  • Filetage:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-PR30__150
Prijs:  CHF 41,00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 150mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO20__100
Prijs:  24,00 CHF
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  100mm
  • Diamètre:  20mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO16__20
Prijs:  CHF16.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20mm
  • Diamètre:  16mm
Op voorraad – Verzendtijd 1-2 dagen