text.skipToContent text.skipToNavigation

Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña

MMC

Se han encontrado 111 producto(s)

Port de changeur de stylet HR-X1-3P

ID: M00-114-213-000

Precio: 267,00 CHF

Resumen: Port changeur de stylet triple pour palpeur de scanning HP-S-X1S.

Comptabilité palpeur: HP-S-X1S

Existencias disponibles - Envío en 1-2 días

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Precio: 884,00 CHF

Resumen: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetage: M8

Existencias disponibles - Envío en 1-2 días

Vee Locator

ID: FV-FEMALE

Precio: 25,00 CHF

Resumen: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

Existencias disponibles - Envío en 1-2 días

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Precio: 31,00 CHF

Resumen: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Kinematic Fixture Plate 500x500mm (Plain)

ID: KPP-500__500

Precio: 758,00 CHF

Resumen: The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Plaque adaptable: KB-400/400, KB-UNIVL

Existencias disponibles - Envío en 1-2 días

Spring Clamp (M8)

ID: FX-SPRING

Precio: 48,00 CHF

Resumen: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Kinematic Fixture Plate 300x300mm (Plain)

ID: KPP-300__300

Precio: 495,00 CHF

Resumen: The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Plaque adaptable: KB-250/250, KB-UNIVL

Existencias disponibles - Envío en 1-2 días

Thumb Screw M8

ID: FX-THUMB

Precio: 9,00 CHF

Resumen: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Filetage: M8

Existencias disponibles - Envío en 1-2 días

Vee Block Twin

ID: FV-VEETWIN

Precio: 42,00 CHF

Resumen: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Existencias disponibles - Envío en 1-2 días

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Precio: 9,00 CHF

Resumen: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20mm
Diamètre: 8mm

Existencias disponibles - Envío en 1-2 días

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Precio: 20,70 CHF

Resumen: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20mm
Diamètre: 16mm

Existencias disponibles - Envío en 1-2 días

Cone Adjustable (M4)

ID: FV-CONEADJ

Precio: 18,40 CHF

Resumen: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Filetage: M4

Existencias disponibles - Envío en 1-2 días

Hinge Pivot With Handle

ID: FX-PR30HINGE

Precio: 62,10 CHF

Resumen: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

Existencias disponibles - Envío en 1-2 días

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Precio: 40,25 CHF

Resumen: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Precio: 29,90 CHF

Resumen: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 100mm
Diamètre: 16mm

Existencias disponibles - Envío en 1-2 días

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Precio: CHF695.00

Resumen: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetage: M8

Existencias disponibles - Envío en 1-2 días

Spring Nut (M8)

ID: FX-M8SPRGNUT

Precio: CHF31.00

Resumen: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

Existencias disponibles - Envío en 1-2 días

Swift-Fix - Starter Kit

ID: FX-STARTER__KIT

Precio: CHF1,095.00

Resumen: The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.