text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Azonosító: FX-SO20__30
Ár:  CHF18.00
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  30
  • Diamètre:  20
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-UNI__JOINT
Ár:  CHF95.00
Gyors áttekintés:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Filetage:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SO__MAG
Ár:  CHF22.00
Gyors áttekintés:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longueur:  20
  • Diamètre:  16
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-VEE
Ár:  CHF77.00
Gyors áttekintés:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Filetage:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-KINKIT
Ár:  CHF262.00
Gyors áttekintés:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-PR30PLATE
Ár:  CHF49.00
Gyors áttekintés:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Taille:  130 x 30 mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-PR30__250
Ár:  CHF49.00
Gyors áttekintés:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 250
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-PR30__50
Ár:  CHF38.00
Gyors áttekintés:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 50
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-PR30__100
Ár:  CHF40.00
Gyors áttekintés:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 100
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SO__PIN
Ár:  CHF22.00
Gyors áttekintés:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longueur:  25
  • Diamètre:  16
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SO16__30
Ár:  CHF18.00
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  30
  • Diamètre:  16
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SLIDER
Ár:  26,00 CHF
Gyors áttekintés:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetage:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SO16__50
Ár:  19,00 CHF
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  50
  • Diamètre:  16
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-PR30__200
Ár:  46,00 CHF
Gyors áttekintés:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 200
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-PLUNGER
Ár:  95,00 CHF
Gyors áttekintés:  The spring plunger exerts low forces to hold sensible parts in position.
  • Filetage:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-SO20__50
Ár:  19,00 CHF
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  50
  • Diamètre:  20
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-LATLGE
Ár:  63,00 CHF
Gyors áttekintés:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longueur:  20
  • Diamètre:  20
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-KINKITPLUS
Ár:  275,00 CHF
Gyors áttekintés:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-TOG
Ár:  139,00 CHF
Gyors áttekintés:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Filetage:  M8
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FX-PILLAR__KIT
Ár:  1 020,00 CHF
Gyors áttekintés:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
Raktáron - Kiszállítás 1-2 napon belül