text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
ID: I00000005
Precio:  €791.00
  • Comptabilité:  Absolute Arm RA7
  • Type de prise:  ODU
  • USB / LAN:  LAN
  • Compatibilité du scanner:  RS3
  • Tensio:  2.255V
Existencias disponibles - Envío en 1-2 días
Single-CMM Dryer / Filter (110 V)
ID: H007622
Precio:  €1,693.00
Resumen:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Poids:  5,7kg
Existencias disponibles - Envío en 1-2 días
Multi-CMM Dryer / Filter (110 V)
ID: H007621
Precio:  €3,184.00
Resumen:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12bar
  • Min. Pressure:  6,9bar
  • Poids:  25kg
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  €616.00
Resumen:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60mm
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  €531.00
Resumen:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40mm
Existencias disponibles - Envío en 1-2 días
Maintenance Kit (Single-CMM)
ID: H007624
Precio:  €166.00
Resumen:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • Compatibilité du système:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Poids:  0,181kg
Existencias disponibles - Envío en 1-2 días
Upgrade from Filter only to Dryer / Filter
ID: H007626
Precio:  €916.00
Resumen:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • Compatibilité du système:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Poids:  1,724kg
Existencias disponibles - Envío en 1-2 días
Maintenance Kit (Multi-CMM)
ID: H007625
Precio:  €221.00
Resumen:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • Compatibilité du système:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Poids:  0,363kg
Existencias disponibles - Envío en 1-2 días
Single-CMM Filter only (110 V)
ID: H007623
Precio: 
Resumen:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Poids:  3,72kg
Existencias disponibles - Envío en 1-2 días
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Precio:  €864.00
Resumen:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plaque adaptable:  KB-400/400, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M8)
ID: FX-SPRING
Precio:  €55.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Precio:  €564.00
Resumen:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plaque adaptable:  KB-250/250, KB-UNIVL
Existencias disponibles - Envío en 1-2 días
Thumb Screw M8
ID: FX-THUMB
Precio:  €10.00
Resumen:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  €18.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20mm
  • Diamètre:  16mm
Existencias disponibles - Envío en 1-2 días
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  €54.00
Resumen:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  €26.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  100mm
  • Diamètre:  16mm
Existencias disponibles - Envío en 1-2 días
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  €35.00
Resumen:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Precio:  €1,248.00
Resumen:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Existencias disponibles - Envío en 1-2 días
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Precio:  €62.00
Resumen:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Taille:  120 x 45 x 12 mmmm
Existencias disponibles - Envío en 1-2 días
Support Stop
ID: FX-SUP__STOP
Precio:  €95.00
Resumen:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días