text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

CMM

111 product(en) gevonden

Port de changeur de stylet HR-X1-3P

ID: M00-114-213-000

Prijs: 267,00 CHF

Beknopt overzicht: Port changeur de stylet triple pour palpeur de scanning HP-S-X1S.

Comptabilité palpeur: HP-S-X1S

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Prijs: 884,00 CHF

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetage: M8

Op voorraad – Verzendtijd 1-2 dagen

Vee Locator

ID: FV-FEMALE

Prijs: 25,00 CHF

Beknopt overzicht: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

Op voorraad – Verzendtijd 1-2 dagen

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Prijs: 31,00 CHF

Beknopt overzicht: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Kinematic Fixture Plate 500x500mm (Plain)

ID: KPP-500__500

Prijs: 758,00 CHF

Beknopt overzicht: The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Plaque adaptable: KB-400/400, KB-UNIVL

Op voorraad – Verzendtijd 1-2 dagen

Spring Clamp (M8)

ID: FX-SPRING

Prijs: 48,00 CHF

Beknopt overzicht: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Kinematic Fixture Plate 300x300mm (Plain)

ID: KPP-300__300

Prijs: 495,00 CHF

Beknopt overzicht: The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Plaque adaptable: KB-250/250, KB-UNIVL

Op voorraad – Verzendtijd 1-2 dagen

Thumb Screw M8

ID: FX-THUMB

Prijs: 9,00 CHF

Beknopt overzicht: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Filetage: M8

Op voorraad – Verzendtijd 1-2 dagen

Vee Block Twin

ID: FV-VEETWIN

Prijs: 42,00 CHF

Beknopt overzicht: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prijs: 9,00 CHF

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20mm
Diamètre: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Prijs: 16,00 CHF

Beknopt overzicht: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20mm
Diamètre: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Cone Adjustable (M4)

ID: FV-CONEADJ

Prijs: 14,00 CHF

Beknopt overzicht: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Filetage: M4

Op voorraad – Verzendtijd 1-2 dagen

Hinge Pivot With Handle

ID: FX-PR30HINGE

Prijs: CHF47.00

Beknopt overzicht: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

Op voorraad – Verzendtijd 1-2 dagen

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Prijs: CHF31.00

Beknopt overzicht: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Prijs: CHF23.00

Beknopt overzicht: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 100mm
Diamètre: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Prijs: CHF695.00

Filetage: M8

Op voorraad – Verzendtijd 1-2 dagen

Spring Nut (M8)

ID: FX-M8SPRGNUT

Prijs: CHF31.00

Beknopt overzicht: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix - Starter Kit

ID: FX-STARTER__KIT

Prijs: CHF1,095.00

Beknopt overzicht: The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.