text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

CMM

111 product(en) gevonden

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)

ID: I00000005

Prijs: 424,35 CHF

Comptabilité: Absolute Arm RA7
Type de prise: ODU
USB / LAN: LAN
Compatibilité du scanner: RS3
Tensio: 2.255V

Op voorraad – Verzendtijd 1-2 dagen

Single-CMM Dryer / Filter (110 V)

ID: H007622

Prijs:

Beknopt overzicht: Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Inlet Flow: 566 L/M [20 CFM] @ 6.9 bar [100 PSI]
Max. Outlet Flow: 473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
Sweep Air Flow: 94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
Max. Air Temperature: 37° C [100° F]
Poids: 5,7kg

Op voorraad – Verzendtijd 1-2 dagen

Multi-CMM Dryer / Filter (110 V)

ID: H007621

Prijs:

Beknopt overzicht: Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Pressure: 12bar
Min. Pressure: 6,9bar
Poids: 25kg

Op voorraad – Verzendtijd 1-2 dagen

Maintenance Kit (Single-CMM)

ID: H007624

Prijs:

Beknopt overzicht: Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.

Compatibilité du système: Single-CMM Dryer / Filter (110 V) / SKU: H007622
Poids: 0,181kg

Op voorraad – Verzendtijd 1-2 dagen

Upgrade from Filter only to Dryer / Filter

ID: H007626

Prijs:

Beknopt overzicht: The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.

Compatibilité du système: H007623 SINGLE-CMM FILTER ONLY (110V)
Poids: 1,724kg

Op voorraad – Verzendtijd 1-2 dagen

Maintenance Kit (Multi-CMM)

ID: H007625

Prijs:

Beknopt overzicht: Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.

Compatibilité du système: Multi-CMM Dryer / Filter (110 V) / SKU: H007621
Poids: 0,363kg

Op voorraad – Verzendtijd 1-2 dagen

Single-CMM Filter only (110 V)

ID: H007623

Prijs:

Beknopt overzicht: The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.

Poids: 3,72kg

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Prijs: 540,00 CHF

Beknopt overzicht: Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Comptabilité: HP-S-X1 Stylus Clampings
Diamètre: 60mm

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Prijs: 466,00 CHF

Beknopt overzicht: Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Comptabilité: HP-S-X3 Stylus Clampings
Diamètre: 40mm

Op voorraad – Verzendtijd 1-2 dagen

Spring Clamp (M8)

ID: FX-SPRING

Prijs: 48,00 CHF

Beknopt overzicht: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Thumb Screw M8

ID: FX-THUMB

Prijs: 9,00 CHF

Beknopt overzicht: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Filetage: M8

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Prijs: zł72.00

Beknopt overzicht: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20mm
Diamètre: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Hinge Pivot With Handle

ID: FX-PR30HINGE

Prijs: zł211.50

Beknopt overzicht: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Prijs: zł103.50

Beknopt overzicht: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 100mm
Diamètre: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Spring Nut (M8)

ID: FX-M8SPRGNUT

Prijs: zł139.50

Beknopt overzicht: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix - Starter Kit

ID: FX-STARTER__KIT

Prijs: zł4,927.50

Beknopt overzicht: The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Filetage: M8
Application: MMT, Bras de mesure portables

Op voorraad – Verzendtijd 1-2 dagen

Standoff Magnet (D = 16 mm / L = 20 mm)

ID: FX-SO__MAG

Prijs: zł90.00

Beknopt overzicht: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.