text.skipToContent text.skipToNavigation

Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password

CMM

112 prodotto/i trovato/i

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)

ID: I00000005

Prezzo: 159 039,00 zł

Comptabilité: Absolute Arm RA7
Type de prise: ODU
USB / LAN: LAN
Compatibilité du scanner: RS3
Tensio: 2255

In giacenza - Spedizione in 1-2 giorni

Single-CMM Dryer / Filter (110 V)

ID: H007622

Prezzo:

Breve panoramica: Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Inlet Flow: 566 L/M [20 CFM] @ 6.9 bar [100 PSI]
Max. Outlet Flow: 473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
Sweep Air Flow: 94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
Max. Air Temperature: 37° C [100° F]
Poids: 5.7

In giacenza - Spedizione in 1-2 giorni

Multi-CMM Dryer / Filter (110 V)

ID: H007621

Prezzo:

Breve panoramica: Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Pressure: 12
Min. Pressure: 6.9
Poids: 25

In giacenza - Spedizione in 1-2 giorni

Maintenance Kit (Single-CMM)

ID: H007624

Prezzo:

Breve panoramica: Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.

Compatibilité du système: Single-CMM Dryer / Filter (110 V) / SKU: H007622
Poids: 0.181

In giacenza - Spedizione in 1-2 giorni

Upgrade from Filter only to Dryer / Filter

ID: H007626

Prezzo:

Breve panoramica: The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.

Compatibilité du système: H007623 SINGLE-CMM FILTER ONLY (110V)
Poids: 1.724

In giacenza - Spedizione in 1-2 giorni

Maintenance Kit (Multi-CMM)

ID: H007625

Prezzo:

Breve panoramica: Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.

Compatibilité du système: Multi-CMM Dryer / Filter (110 V) / SKU: H007621
Poids: 0.363

In giacenza - Spedizione in 1-2 giorni

Single-CMM Filter only (110 V)

ID: H007623

Prezzo:

Breve panoramica: The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.

Poids: 3.720

In giacenza - Spedizione in 1-2 giorni

SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Prezzo: 2 408,00 zł

Breve panoramica: Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Comptabilité: HP-S-X1 Stylus Clampings
Diamètre: 60

In giacenza - Spedizione in 1-2 giorni

SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Prezzo: 2 064,00 zł

Breve panoramica: Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Comptabilité: HP-S-X3 Stylus Clampings
Diamètre: 40

In giacenza - Spedizione in 1-2 giorni

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Prezzo: 3 999,00 zł

Breve panoramica: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetage: M8

In giacenza - Spedizione in 1-2 giorni

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Prezzo: 142,00 zł

Breve panoramica: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

In giacenza - Spedizione in 1-2 giorni

Vee Block Twin

ID: FV-VEETWIN

Prezzo: 202,00 zł

Breve panoramica: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prezzo: 43,00 zł

Breve panoramica: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20
Diamètre: 8

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Prezzo: 77,00 zł

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20
Diamètre: 16

In giacenza - Spedizione in 1-2 giorni

Hinge Pivot With Handle

ID: FX-PR30HINGE

Prezzo: 361,00 zł

Breve panoramica: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

In giacenza - Spedizione in 1-2 giorni

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Prezzo: 142,00 zł

Breve panoramica: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Prezzo: 112,00 zł

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.