text.skipToContent text.skipToNavigation

W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła

WMP

Znaleziono 111 produkt(y/ów)

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)

ID: I00000005

Cena: 324,72 £

Comptabilité: Absolute Arm RA7
Type de prise: ODU
USB / LAN: LAN
Compatibilité du scanner: RS3
Tensio: 2 255V

W magazynie — wysyłka 1–2 dni

Single-CMM Dryer / Filter (110 V)

ID: H007622

Cena:

Szybki podgląd: Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Inlet Flow: 566 L/M [20 CFM] @ 6.9 bar [100 PSI]
Max. Outlet Flow: 473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
Sweep Air Flow: 94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
Max. Air Temperature: 37° C [100° F]
Poids: 5,7kg

W magazynie — wysyłka 1–2 dni

Multi-CMM Dryer / Filter (110 V)

ID: H007621

Cena:

Szybki podgląd: Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Pressure: 12bar
Min. Pressure: 6,9bar
Poids: 25kg

W magazynie — wysyłka 1–2 dni

Maintenance Kit (Single-CMM)

ID: H007624

Cena:

Szybki podgląd: Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.

Compatibilité du système: Single-CMM Dryer / Filter (110 V) / SKU: H007622
Poids: 0,181kg

W magazynie — wysyłka 1–2 dni

Upgrade from Filter only to Dryer / Filter

ID: H007626

Cena:

Szybki podgląd: The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.

Compatibilité du système: H007623 SINGLE-CMM FILTER ONLY (110V)
Poids: 1,724kg

W magazynie — wysyłka 1–2 dni

Maintenance Kit (Multi-CMM)

ID: H007625

Cena:

Szybki podgląd: Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.

Compatibilité du système: Multi-CMM Dryer / Filter (110 V) / SKU: H007621
Poids: 0,363kg

W magazynie — wysyłka 1–2 dni

Single-CMM Filter only (110 V)

ID: H007623

Cena:

Szybki podgląd: The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.

Poids: 3,72kg

W magazynie — wysyłka 1–2 dni

SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Cena: 466,00 £

Szybki podgląd: Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Comptabilité: HP-S-X1 Stylus Clampings
Diamètre: 60mm

W magazynie — wysyłka 1–2 dni

SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Cena: 402,00 £

Szybki podgląd: Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Comptabilité: HP-S-X3 Stylus Clampings
Diamètre: 40mm

W magazynie — wysyłka 1–2 dni

Jeu de 4 adaptateurs coudé

ID: 03969394

Cena: 2 224,00 £

Szybki podgląd: Jeu de 4 adaptateurs TKJ à angle (0°, 30°, 60°, 90°) en aluminium et acier inoxydable. À utiliser uniquement avec HP-L-10.6

W magazynie — wysyłka 1–2 dni

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Cena: 762,00 £

Szybki podgląd: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetage: M8

W magazynie — wysyłka 1–2 dni

Vee Locator

ID: FV-FEMALE

Cena: 22,00 £

Szybki podgląd: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

W magazynie — wysyłka 1–2 dni

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Cena: 31,00 CHF

Szybki podgląd: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

W magazynie — wysyłka 1–2 dni

Vee Block Twin

ID: FV-VEETWIN

Cena: 42,00 CHF

Szybki podgląd: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

W magazynie — wysyłka 1–2 dni

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Cena: 9,00 CHF

Szybki podgląd: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longueur: 20mm
Diamètre: 8mm

W magazynie — wysyłka 1–2 dni

Cone Adjustable (M4)

ID: FV-CONEADJ

Cena: 14,00 CHF

Szybki podgląd: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Filetage: M4

W magazynie — wysyłka 1–2 dni

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Cena: 31,00 CHF

Szybki podgląd: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

W magazynie — wysyłka 1–2 dni

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Cena: 695,00 CHF

Filetage: M8

W magazynie — wysyłka 1–2 dni

Spring Pusher Standoff Clamp (D=8mm / L=10mm)

ID: FV-LATSML

Cena: 32,00 CHF

Szybki podgląd: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Longueur: 10mm
Diamètre: 8mm

W magazynie — wysyłka 1–2 dni

Swift-Fix - Bronze Kit

ID: FX-BRONZE__KIT

Cena: 968,00 CHF

Szybki podgląd: The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Filetage: M8
Application: MMT, Bras de mesure portables

W magazynie — wysyłka 1–2 dni

Dodano do koszyka.

Previous
1(current)
2
3
4
5
Next

Dostępność produktu według lokalizacji sklepu

Godziny