text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog
  3. KMG

KMG

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
ID: I00000005
Cena:  159 039,00 zł
  • Comptabilité:  Absolute Arm RA7
  • Type de prise:  ODU
  • USB / LAN:  LAN
  • Compatibilité du scanner:  RS3
  • Tensio:  2 255V
W magazynie — wysyłka 1–2 dni
Single-CMM Dryer / Filter (110 V)
Single-CMM Dryer / Filter (110 V)
ID: H007622
Cena: 
Szybki podgląd:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Poids:  5,7kg
W magazynie — wysyłka 1–2 dni
Multi-CMM Dryer / Filter (110 V)
Multi-CMM Dryer / Filter (110 V)
ID: H007621
Cena: 
Szybki podgląd:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12bar
  • Min. Pressure:  6,9bar
  • Poids:  25kg
W magazynie — wysyłka 1–2 dni
Maintenance Kit (Single-CMM)
Maintenance Kit (Single-CMM)
ID: H007624
Cena: 
Szybki podgląd:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • Compatibilité du système:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Poids:  0,181kg
W magazynie — wysyłka 1–2 dni
Upgrade from Filter only to Dryer / Filter
Upgrade from Filter only to Dryer / Filter
ID: H007626
Cena: 
Szybki podgląd:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • Compatibilité du système:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Poids:  1,724kg
W magazynie — wysyłka 1–2 dni
Maintenance Kit (Multi-CMM)
Maintenance Kit (Multi-CMM)
ID: H007625
Cena: 
Szybki podgląd:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • Compatibilité du système:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Poids:  0,363kg
W magazynie — wysyłka 1–2 dni
Single-CMM Filter only (110 V)
Single-CMM Filter only (110 V)
ID: H007623
Cena:  785,00 $
Szybki podgląd:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Poids:  3,72kg
W magazynie — wysyłka 1–2 dni
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  498,00 $
Szybki podgląd:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60mm
W magazynie — wysyłka 1–2 dni
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  427,00 $
Szybki podgląd:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40mm
W magazynie — wysyłka 1–2 dni
Kinematic Support Kit
Kinematic Support Kit
ID: FX-KINKIT
Cena:  1.129,50 zł
Szybki podgląd:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
W magazynie — wysyłka 1–2 dni
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Cena:  211,50 zł
Szybki podgląd:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Taille:  130 x 30 mmmm
W magazynie — wysyłka 1–2 dni
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Cena:  211,50 zł
Szybki podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 250mm
W magazynie — wysyłka 1–2 dni
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Cena:  162,00 zł
Szybki podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 50mm
W magazynie — wysyłka 1–2 dni
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Cena:  171,00 zł
Szybki podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 100mm
W magazynie — wysyłka 1–2 dni
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Cena:  90,00 zł
Szybki podgląd:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longueur:  25mm
  • Diamètre:  16mm
W magazynie — wysyłka 1–2 dni
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Cena:  72,00 zł
Szybki podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  30mm
  • Diamètre:  16mm
W magazynie — wysyłka 1–2 dni
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Cena:  108,00 zł
Szybki podgląd:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetage:  M8
W magazynie — wysyłka 1–2 dni
Standoff (D = 16 mm / L = 50 mm)
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Cena:  76,50 zł
Szybki podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  50mm
  • Diamètre:  16mm
W magazynie — wysyłka 1–2 dni
Kinematic Support Kit Plus
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Cena:  1.183,50 zł
Szybki podgląd:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
W magazynie — wysyłka 1–2 dni
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Cena:  481,50 zł
Szybki podgląd:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Filetage:  M8
W magazynie — wysyłka 1–2 dni