text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM

CMM

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
ID: I00000005
Prezzo:  791,00 $
  • Comptabilité:  Absolute Arm RA7
  • Type de prise:  ODU
  • USB / LAN:  LAN
  • Compatibilité du scanner:  RS3
  • Tensio:  2255
In giacenza - Spedizione in 1-2 giorni
Single-CMM Dryer / Filter (110 V)
Single-CMM Dryer / Filter (110 V)
ID: H007622
Prezzo:  1 693,00 $
Breve panoramica:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Poids:  5.7
In giacenza - Spedizione in 1-2 giorni
Multi-CMM Dryer / Filter (110 V)
Multi-CMM Dryer / Filter (110 V)
ID: H007621
Prezzo:  3 184,00 $
Breve panoramica:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12
  • Min. Pressure:  6.9
  • Poids:  25
In giacenza - Spedizione in 1-2 giorni
Maintenance Kit (Single-CMM)
Maintenance Kit (Single-CMM)
ID: H007624
Prezzo:  166,00 $
Breve panoramica:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • Compatibilité du système:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Poids:  0.181
In giacenza - Spedizione in 1-2 giorni
Upgrade from Filter only to Dryer / Filter
Upgrade from Filter only to Dryer / Filter
ID: H007626
Prezzo:  916,00 $
Breve panoramica:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • Compatibilité du système:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Poids:  1.724
In giacenza - Spedizione in 1-2 giorni
Maintenance Kit (Multi-CMM)
Maintenance Kit (Multi-CMM)
ID: H007625
Prezzo:  221,00 $
Breve panoramica:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • Compatibilité du système:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Poids:  0.363
In giacenza - Spedizione in 1-2 giorni
Single-CMM Filter only (110 V)
Single-CMM Filter only (110 V)
ID: H007623
Prezzo:  785,00 $
Breve panoramica:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Référence:  FILTERKIT#15
  • Poids:  3.720
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  498,00 $
Breve panoramica:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  427,00 $
Breve panoramica:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40
In giacenza - Spedizione in 1-2 giorni
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Prezzo:  13,00 $
Breve panoramica:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Filetage:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prezzo:  19,00 £
Breve panoramica:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longueur:  20
  • Diamètre:  16
In giacenza - Spedizione in 1-2 giorni
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Prezzo:  44,00 £
Breve panoramica:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Taille:  130 x 30 mm
In giacenza - Spedizione in 1-2 giorni
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Prezzo:  19,00 £
Breve panoramica:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longueur:  25
  • Diamètre:  16
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Prezzo:  15,00 £
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  30
  • Diamètre:  16
In giacenza - Spedizione in 1-2 giorni
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Prezzo:  23,00 £
Breve panoramica:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetage:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 50 mm)
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Prezzo:  16,00 £
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  50
  • Diamètre:  16
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Silver Kit
Swift-Fix - Silver Kit
ID: FX-SILVER__KIT
Prezzo:  1.491,00 £
Breve panoramica:  The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
In giacenza - Spedizione in 1-2 giorni
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Prezzo:  114,00 £
Breve panoramica:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Filetage:  M8
In giacenza - Spedizione in 1-2 giorni
Vee Block Single
Vee Block Single
ID: FV-VEE
Prezzo:  28,00 £
Breve panoramica:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
In giacenza - Spedizione in 1-2 giorni
Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Prezzo:  84,00 £
Breve panoramica:  The spring plunger exerts low forces to hold sensible parts in position.
  • Filetage:  M8
In giacenza - Spedizione in 1-2 giorni