text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT

MMT

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
N° : I00000005
Prix:  $791.00
  • Probe Compatibility:  Absolute Arm RA7
  • Plug Type:  ODU
  • USB / LAN:  LAN
  • Scanner Compatibility:  RS3
  • Voltage:  2255
En stock - Livraison sous 1 à 2 jours
Single-CMM Dryer / Filter (110 V)
Single-CMM Dryer / Filter (110 V)
N° : H007622
Prix:  $1,693.00
Vue d'ensemble sommaire:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Weight:  5.7
En stock - Livraison sous 1 à 2 jours
Multi-CMM Dryer / Filter (110 V)
Multi-CMM Dryer / Filter (110 V)
N° : H007621
Prix:  $3,184.00
Vue d'ensemble sommaire:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12
  • Min. Pressure:  6.9
  • Weight:  25
En stock - Livraison sous 1 à 2 jours
Maintenance Kit (Single-CMM)
Maintenance Kit (Single-CMM)
N° : H007624
Prix:  $166.00
Vue d'ensemble sommaire:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Weight:  0.181
En stock - Livraison sous 1 à 2 jours
Upgrade from Filter only to Dryer / Filter
Upgrade from Filter only to Dryer / Filter
N° : H007626
Prix:  $916.00
Vue d'ensemble sommaire:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • System Compatibility:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Weight:  1.724
En stock - Livraison sous 1 à 2 jours
Maintenance Kit (Multi-CMM)
Maintenance Kit (Multi-CMM)
N° : H007625
Prix:  $221.00
Vue d'ensemble sommaire:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Weight:  0.363
En stock - Livraison sous 1 à 2 jours
Single-CMM Filter only (110 V)
Single-CMM Filter only (110 V)
N° : H007623
Prix:  $785.00
Vue d'ensemble sommaire:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Part Number:  FILTERKIT#15
  • Weight:  3.720
En stock - Livraison sous 1 à 2 jours
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  $498.00
Vue d'ensemble sommaire:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Modules
  • Diameter:  60
En stock - Livraison sous 1 à 2 jours
SWIFT-SET Adapter for HP-S-X3 Stylus Modules
SWIFT-SET Adapter for HP-S-X3 Stylus Modules
N° : GB0122-0019
Prix:  $427.00
  • Probe Compatibility:  HP-S-X3 Stylus Modules
  • Diameter:  40
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x250mm
Pillar 30x30x250mm
N° : FX-PR30__250
Prix:  $44.00
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 250
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x50mm
Pillar 30x30x50mm
N° : FX-PR30__50
Prix:  $34.00
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 50
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x100mm
Pillar 30x30x100mm
N° : FX-PR30__100
Prix:  $36.00
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 100
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
N° : FX-BP600__600
Prix:  $1,549.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
N° : FV-SO__PIN
Prix:  $9.00
Vue d'ensemble sommaire:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Length:  10
  • Diameter:  8
En stock - Livraison sous 1 à 2 jours
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
N° : FX-SO__PIN
Prix:  $16.00
Vue d'ensemble sommaire:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Length:  25
  • Diameter:  16
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
N° : FX-SO16__30
Prix:  $12.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  30
  • Diameter:  16
En stock - Livraison sous 1 à 2 jours
Universal Clamp (M8)
Universal Clamp (M8)
N° : FX-CLAMP
Prix:  123,05 CHF
Vue d'ensemble sommaire:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Vee Block Single
Vee Block Single
N° : FV-VEE
Prix:  33,35 CHF
Vue d'ensemble sommaire:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
En stock - Livraison sous 1 à 2 jours
Spring Plunger
Spring Plunger
N° : FX-PLUNGER
Prix:  104,65 CHF
Vue d'ensemble sommaire:  The spring plunger exerts low forces to hold sensible parts in position.
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
N° : FX-ARM
Prix:  95,45 CHF
Vue d'ensemble sommaire:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Thread:  M8
En stock - Livraison sous 1 à 2 jours