text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM

CMM

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
ID: I00000005
Prijs:  €369.00
  • Probe Compatibility:  Absolute Arm RA7
  • Plug Type:  ODU
  • USB / LAN:  LAN
  • Scanner Compatibility:  RS3
  • Voltage:  2.255V
Op voorraad – Verzendtijd 1-2 dagen
Single-CMM Dryer / Filter (110 V)
Single-CMM Dryer / Filter (110 V)
ID: H007622
Prijs: 
Beknopt overzicht:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Weight:  5,7kg
Op voorraad – Verzendtijd 1-2 dagen
Multi-CMM Dryer / Filter (110 V)
Multi-CMM Dryer / Filter (110 V)
ID: H007621
Prijs: 
Beknopt overzicht:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12bar
  • Min. Pressure:  6,9bar
  • Weight:  25kg
Op voorraad – Verzendtijd 1-2 dagen
Maintenance Kit (Single-CMM)
Maintenance Kit (Single-CMM)
ID: H007624
Prijs: 
Beknopt overzicht:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Weight:  0,181kg
Op voorraad – Verzendtijd 1-2 dagen
Upgrade from Filter only to Dryer / Filter
Upgrade from Filter only to Dryer / Filter
ID: H007626
Prijs: 
Beknopt overzicht:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • System Compatibility:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Weight:  1,724kg
Op voorraad – Verzendtijd 1-2 dagen
Maintenance Kit (Multi-CMM)
Maintenance Kit (Multi-CMM)
ID: H007625
Prijs: 
Beknopt overzicht:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Weight:  0,363kg
Op voorraad – Verzendtijd 1-2 dagen
Single-CMM Filter only (110 V)
Single-CMM Filter only (110 V)
ID: H007623
Prijs: 
Beknopt overzicht:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Weight:  3,72kg
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  €540.00
Beknopt overzicht:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Modules
  • Diameter:  60mm
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET Adapter for HP-S-X3 Stylus Modules
SWIFT-SET Adapter for HP-S-X3 Stylus Modules
ID: GB0122-0019
Prijs:  €466.00
  • Probe Compatibility:  HP-S-X3 Stylus Modules
  • Diameter:  40mm
Op voorraad – Verzendtijd 1-2 dagen
HA-TT-300 Probe Extension TKJ (L = 300 mm)
HA-TT-300 Probe Extension TKJ (L = 300 mm)
ID: 03969363
Prijs:  €1,340.00
Beknopt overzicht:  TKJ extension made of aluminium and stainless steel with a length of 300 mm
  • Length (L):  300mm
  • Material:  Aluminium / Steel
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  €884.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread:  M8
Op voorraad – Verzendtijd 1-2 dagen
Vee Locator
Vee Locator
ID: FV-FEMALE
Prijs:  €25.00
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  €31.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  €42.00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  €9.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  €14.00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Thread:  M4
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  €31.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  €695.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread:  M8
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prijs:  €32.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  10mm
  • Diameter:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prijs:  €968.00
Beknopt overzicht:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Thread:  M8
  • Application:  CMM, Portable Measuring Arm
Op voorraad – Verzendtijd 1-2 dagen