Skip to content Skip to navigation menu

As part of our new security upgrades, you are requested to reset your password

CMM

112 Product(s) found

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)

ID: I00000005

Price: 159 039,00 zł

Probe Compatibility: Absolute Arm RA7
Plug Type: ODU
USB / LAN: LAN
Scanner Compatibility: RS3
Voltage: 2255

In Stock - Despatched 1-2 Days

Single-CMM Dryer / Filter (110 V)

ID: H007622

Price:

Quick Overview: Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Inlet Flow: 566 L/M [20 CFM] @ 6.9 bar [100 PSI]
Max. Outlet Flow: 473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
Sweep Air Flow: 94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
Max. Air Temperature: 37° C [100° F]
Weight: 5.7

In Stock - Despatched 1-2 Days

Multi-CMM Dryer / Filter (110 V)

ID: H007621

Price:

Quick Overview: Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Pressure: 12
Min. Pressure: 6.9
Weight: 25

In Stock - Despatched 1-2 Days

Maintenance Kit (Single-CMM)

ID: H007624

Price:

Quick Overview: Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.

System Compatibility: Single-CMM Dryer / Filter (110 V) / SKU: H007622
Weight: 0.181

In Stock - Despatched 1-2 Days

Upgrade from Filter only to Dryer / Filter

ID: H007626

Price:

Quick Overview: The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.

System Compatibility: H007623 SINGLE-CMM FILTER ONLY (110V)
Weight: 1.724

In Stock - Despatched 1-2 Days

Maintenance Kit (Multi-CMM)

ID: H007625

Price:

Quick Overview: Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.

System Compatibility: Multi-CMM Dryer / Filter (110 V) / SKU: H007621
Weight: 0.363

In Stock - Despatched 1-2 Days

Single-CMM Filter only (110 V)

ID: H007623

Price:

Quick Overview: The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.

Part Number: FILTERKIT#15
Weight: 3.720

In Stock - Despatched 1-2 Days

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Price: 2 408,00 zł

Quick Overview: Adapter to allow X1 styli builds

Probe Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60

In Stock - Despatched 1-2 Days

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Price: 2 064,00 zł

Probe Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40

In Stock - Despatched 1-2 Days

Pillar 30x30x250mm

ID: FX-PR30__250

Price: 211,00 zł

Quick Overview: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Size: 30 x 30 x 250

In Stock - Despatched 1-2 Days

Pillar 30x30x50mm

ID: FX-PR30__50

Price: 163,00 zł

Quick Overview: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Size: 30 x 30 x 50

In Stock - Despatched 1-2 Days

Pillar 30x30x100mm

ID: FX-PR30__100

Price: 172,00 zł

Quick Overview: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Size: 30 x 30 x 100

In Stock - Despatched 1-2 Days

Fixture Baseplate 600x600x12mm (M8)

ID: FX-BP600__600

Price: 8 170,00 zł

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Threa: M8

In Stock - Despatched 1-2 Days

Standoff Pin (D = 8 mm / L = 10 mm)

ID: FV-SO__PIN

Price: 82,00 zł

Quick Overview: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Length: 10
Diameter: 8

In Stock - Despatched 1-2 Days

Standoff Pin M8 (D= 16 mm/L= 20 mm)

ID: FX-SO__PIN

Price: 95,00 zł

Quick Overview: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Length: 25
Diameter: 16

In Stock - Despatched 1-2 Days

Standoff (D = 16 mm / L = 30 mm)

ID: FX-SO16__30

Price: 77,00 zł

Quick Overview: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 30
Diameter: 16

In Stock - Despatched 1-2 Days

Universal Clamp (M8)

ID: FX-CLAMP

Price: 555,00 zł

Quick Overview: The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.

Threa: M8

In Stock - Despatched 1-2 Days

Vee Block Single

ID: FV-VEE

Price: 138,00 zł

Quick Overview: The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.

In Stock - Despatched 1-2 Days

Spring Plunger

ID: FX-PLUNGER

Price: 409,00 zł

Quick Overview: The spring plunger exerts low forces to hold sensible parts in position.

Threa: M8

In Stock - Despatched 1-2 Days

Articulated Fixture Arm (M8)

ID: FX-ARM

Price: zł611.00

Quick Overview: The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.

Threa: M8

In Stock - Despatched 1-2 Days

Added to your shopping cart.

Previous
1(current)
2
3
4
5
Next

Product availability by store location

Hours