text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog
  3. WMP

WMP

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
ID: I00000005
Cena:  CHF424.35
  • Probe Compatibility:  Absolute Arm RA7
  • Plug Type:  ODU
  • USB / LAN:  LAN
  • Scanner Compatibility:  RS3
  • Voltage:  2255
W magazynie — wysyłka 1–2 dni
Single-CMM Dryer / Filter (110 V)
Single-CMM Dryer / Filter (110 V)
ID: H007622
Cena: 
Szybki podgląd:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Weight:  5.7
W magazynie — wysyłka 1–2 dni
Multi-CMM Dryer / Filter (110 V)
Multi-CMM Dryer / Filter (110 V)
ID: H007621
Cena: 
Szybki podgląd:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12
  • Min. Pressure:  6.9
  • Weight:  25
W magazynie — wysyłka 1–2 dni
Maintenance Kit (Single-CMM)
Maintenance Kit (Single-CMM)
ID: H007624
Cena: 
Szybki podgląd:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Weight:  0.181
W magazynie — wysyłka 1–2 dni
Upgrade from Filter only to Dryer / Filter
Upgrade from Filter only to Dryer / Filter
ID: H007626
Cena: 
Szybki podgląd:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • System Compatibility:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Weight:  1.724
W magazynie — wysyłka 1–2 dni
Maintenance Kit (Multi-CMM)
Maintenance Kit (Multi-CMM)
ID: H007625
Cena: 
Szybki podgląd:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Weight:  0.363
W magazynie — wysyłka 1–2 dni
Single-CMM Filter only (110 V)
Single-CMM Filter only (110 V)
ID: H007623
Cena: 
Szybki podgląd:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Part Number:  FILTERKIT#15
  • Weight:  3.720
W magazynie — wysyłka 1–2 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  zł2,408.00
Szybki podgląd:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
W magazynie — wysyłka 1–2 dni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  zł2,064.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
W magazynie — wysyłka 1–2 dni
HA-M-50 Probe Extension M8 (L = 50 mm)
HA-M-50 Probe Extension M8 (L = 50 mm)
ID: 03969065
Cena:  zł972.00
  • Length (L):  50
  • Material:  Aluminium
W magazynie — wysyłka 1–2 dni
HA-M-200 Probe Extension M8 (L = 200 mm)
HA-M-200 Probe Extension M8 (L = 200 mm)
ID: 03969067
Cena:  zł940.00
  • Length (L):  200
  • Material:  Aluminium
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  zł3,999.00
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  zł142.00
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  zł202.00
Szybki podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
W magazynie — wysyłka 1–2 dni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  zł43.00
Szybki podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20
  • Diameter:  8
W magazynie — wysyłka 1–2 dni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Cena:  zł77.00
Szybki podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20
  • Diameter:  16
W magazynie — wysyłka 1–2 dni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Cena:  zł361.00
Szybki podgląd:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  zł142.00
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Cena:  zł112.00
Szybki podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  100
  • Diameter:  16
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  780,00 CHF
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
W magazynie — wysyłka 1–2 dni