Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded cable with M12/F08 and D-SUB HD/M15 plugs. Length: 5 m / 16.4'
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded, drag chain capable cable with M12/F08 and D-SUB HD/M15 plug. Length: 10 m / 32.8'
Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded, drag chain capable cable with M12/F08 and D-SUB HD/M15 plug. Length: 10 m / 32.8'
Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded cable with M12/F08 and D-SUB HD/M15 plug. Length: 15 m / 49.2'
Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded cable with M12/F08 and D-SUB HD/M15 plug. Length: 15 m / 49.2'
Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded, drag chain capable cable with M12/F08 and D-SUB HD/M15 plug. Length: 10 m / 32.8'
Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Heidenhain controls with control input X13. Shielded cable with D-SUB HD/M9 plug and open wires. Length: 2 m / 6.6'
Taper shank SK40/CAT40 with metric pull stud thread for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. With built-in pull stud AZ-01 for probe activation via preloaded pull stud.
Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
