Skip to content Skip to navigation menu

As part of our new security upgrades, you are requested to reset your password

CMM

112 Product(s) found

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)

ID: I00000005

Price: zł159,039.00

Probe Compatibility: Absolute Arm RA7
Plug Type: ODU
USB / LAN: LAN
Scanner Compatibility: RS3
Voltage: 2255

In Stock - Despatched 1-2 Days

Single-CMM Dryer / Filter (110 V)

ID: H007622

Price:

Quick Overview: Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Inlet Flow: 566 L/M [20 CFM] @ 6.9 bar [100 PSI]
Max. Outlet Flow: 473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
Sweep Air Flow: 94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
Max. Air Temperature: 37° C [100° F]
Weight: 5.7

In Stock - Despatched 1-2 Days

Multi-CMM Dryer / Filter (110 V)

ID: H007621

Price:

Quick Overview: Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Pressure: 12
Min. Pressure: 6.9
Weight: 25

In Stock - Despatched 1-2 Days

Maintenance Kit (Single-CMM)

ID: H007624

Price:

Quick Overview: Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.

System Compatibility: Single-CMM Dryer / Filter (110 V) / SKU: H007622
Weight: 0.181

In Stock - Despatched 1-2 Days

Upgrade from Filter only to Dryer / Filter

ID: H007626

Price:

Quick Overview: The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.

System Compatibility: H007623 SINGLE-CMM FILTER ONLY (110V)
Weight: 1.724

In Stock - Despatched 1-2 Days

Maintenance Kit (Multi-CMM)

ID: H007625

Price:

Quick Overview: Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.

System Compatibility: Multi-CMM Dryer / Filter (110 V) / SKU: H007621
Weight: 0.363

In Stock - Despatched 1-2 Days

Single-CMM Filter only (110 V)

ID: H007623

Price:

Quick Overview: The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.

Weight: 3.720

In Stock - Despatched 1-2 Days

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Price: zł2,408.00

Quick Overview: Adapter to allow X1 styli builds

Probe Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60

In Stock - Despatched 1-2 Days

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Price: CHF480.00

Probe Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40

In Stock - Despatched 1-2 Days

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Price: CHF930.00

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Threa: M8

In Stock - Despatched 1-2 Days

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Price: CHF33.00

Quick Overview: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

In Stock - Despatched 1-2 Days

Vee Block Twin

ID: FV-VEETWIN

Price: CHF47.00

Quick Overview: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

In Stock - Despatched 1-2 Days

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Price: CHF10.00

Quick Overview: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 20
Diameter: 8

In Stock - Despatched 1-2 Days

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Price: CHF18.00

Quick Overview: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 20
Diameter: 16

In Stock - Despatched 1-2 Days

Hinge Pivot With Handle

ID: FX-PR30HINGE

Price: CHF84.00

Quick Overview: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

In Stock - Despatched 1-2 Days

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Price: CHF33.00

Quick Overview: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

In Stock - Despatched 1-2 Days

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Price: CHF26.00

Quick Overview: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 100
Diameter: 16

In Stock - Despatched 1-2 Days

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Price: CHF780.00

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.