text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
N° : I00000005
Prix:  €791.00
  • Probe Compatibility:  Absolute Arm RA7
  • Plug Type:  ODU
  • USB / LAN:  LAN
  • Scanner Compatibility:  RS3
  • Voltage:  2 255V
En stock - Livraison sous 1 à 2 jours
Single-CMM Dryer / Filter (110 V)
N° : H007622
Prix:  €1,693.00
Vue d'ensemble sommaire:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Weight:  5,7kg
En stock - Livraison sous 1 à 2 jours
Multi-CMM Dryer / Filter (110 V)
N° : H007621
Prix:  €3,184.00
Vue d'ensemble sommaire:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12bar
  • Min. Pressure:  6,9bar
  • Weight:  25kg
En stock - Livraison sous 1 à 2 jours
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  €616.00
Vue d'ensemble sommaire:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
En stock - Livraison sous 1 à 2 jours
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
N° : GB0122-0019
Prix:  €531.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
En stock - Livraison sous 1 à 2 jours
Maintenance Kit (Single-CMM)
N° : H007624
Prix:  €166.00
Vue d'ensemble sommaire:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Weight:  0,181kg
En stock - Livraison sous 1 à 2 jours
Upgrade from Filter only to Dryer / Filter
N° : H007626
Prix:  €916.00
Vue d'ensemble sommaire:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • System Compatibility:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Weight:  1,724kg
En stock - Livraison sous 1 à 2 jours
Maintenance Kit (Multi-CMM)
N° : H007625
Prix:  €221.00
Vue d'ensemble sommaire:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Weight:  0,363kg
En stock - Livraison sous 1 à 2 jours
Single-CMM Filter only (110 V)
N° : H007623
Prix: 
Vue d'ensemble sommaire:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Weight:  3,72kg
En stock - Livraison sous 1 à 2 jours
Kinematic Fixture Plate 500x500mm (Plain)
N° : KPP-500__500
Prix:  €864.00
Vue d'ensemble sommaire:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plate Compatibility :  KB-400/400, KB-UNIVL
En stock - Livraison sous 1 à 2 jours
Spring Clamp (M8)
N° : FX-SPRING
Prix:  €55.00
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Kinematic Fixture Plate 300x300mm (Plain)
N° : KPP-300__300
Prix:  €564.00
Vue d'ensemble sommaire:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plate Compatibility :  KB-250/250, KB-UNIVL
En stock - Livraison sous 1 à 2 jours
Thumb Screw M8
N° : FX-THUMB
Prix:  €10.00
Vue d'ensemble sommaire:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Threa:  M8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 20 mm)
N° : FX-SO16__20
Prix:  €18.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  16mm
En stock - Livraison sous 1 à 2 jours
Hinge Pivot With Handle
N° : FX-PR30HINGE
Prix:  €54.00
Vue d'ensemble sommaire:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 100 mm)
N° : FX-SO16__100
Prix:  23,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  100mm
  • Diameter:  16mm
En stock - Livraison sous 1 à 2 jours
Spring Nut (M8)
N° : FX-M8SPRGNUT
Prix:  31,00 €
Vue d'ensemble sommaire:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Starter Kit
N° : FX-STARTER__KIT
Prix:  1 095,00 €
Vue d'ensemble sommaire:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
En stock - Livraison sous 1 à 2 jours
Pillar Top Plate  (10 x M8)
N° : FX-SUB45__120
Prix:  54,00 €
Vue d'ensemble sommaire:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Size:  120 x 45 x 12 mmmm
En stock - Livraison sous 1 à 2 jours
Support Stop
N° : FX-SUP__STOP
Prix:  83,00 €
Vue d'ensemble sommaire:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Threa:  M8
En stock - Livraison sous 1 à 2 jours