text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM

CMM

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
ID: I00000005
Prezzo:  zł159,039.00
  • Probe Compatibility:  Absolute Arm RA7
  • Plug Type:  ODU
  • USB / LAN:  LAN
  • Scanner Compatibility:  RS3
  • Voltage:  2255
In giacenza - Spedizione in 1-2 giorni
Single-CMM Dryer / Filter (110 V)
Single-CMM Dryer / Filter (110 V)
ID: H007622
Prezzo: 
Breve panoramica:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Weight:  5.7
In giacenza - Spedizione in 1-2 giorni
Multi-CMM Dryer / Filter (110 V)
Multi-CMM Dryer / Filter (110 V)
ID: H007621
Prezzo: 
Breve panoramica:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12
  • Min. Pressure:  6.9
  • Weight:  25
In giacenza - Spedizione in 1-2 giorni
Maintenance Kit (Single-CMM)
Maintenance Kit (Single-CMM)
ID: H007624
Prezzo: 
Breve panoramica:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Weight:  0.181
In giacenza - Spedizione in 1-2 giorni
Upgrade from Filter only to Dryer / Filter
Upgrade from Filter only to Dryer / Filter
ID: H007626
Prezzo: 
Breve panoramica:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • System Compatibility:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Weight:  1.724
In giacenza - Spedizione in 1-2 giorni
Maintenance Kit (Multi-CMM)
Maintenance Kit (Multi-CMM)
ID: H007625
Prezzo: 
Breve panoramica:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Weight:  0.363
In giacenza - Spedizione in 1-2 giorni
Single-CMM Filter only (110 V)
Single-CMM Filter only (110 V)
ID: H007623
Prezzo: 
Breve panoramica:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Weight:  3.720
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  zł2,408.00
Breve panoramica:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  zł2,064.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
In giacenza - Spedizione in 1-2 giorni
Kinematic Fixture Plate 500x500mm (Plain)
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Prezzo:  zł3,591.00
Breve panoramica:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plate Compatibility :  KB-400/400, KB-UNIVL
In giacenza - Spedizione in 1-2 giorni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prezzo:  zł215.00
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Kinematic Fixture Plate 300x300mm (Plain)
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Prezzo:  zł2,348.00
Breve panoramica:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plate Compatibility :  KB-250/250, KB-UNIVL
In giacenza - Spedizione in 1-2 giorni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prezzo:  zł43.00
Breve panoramica:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prezzo:  zł5,160.00
Breve panoramica:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
In giacenza - Spedizione in 1-2 giorni
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prezzo:  zł258.00
Breve panoramica:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Size:  120 x 45 x 12 mm
In giacenza - Spedizione in 1-2 giorni
Support Stop
Support Stop
ID: FX-SUP__STOP
Prezzo:  zł374.00
Breve panoramica:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Kinematic Fixture Plate 300x300 mm (M8)
Kinematic Fixture Plate 300x300 mm (M8)
ID: KPT-300__300
Prezzo:  zł3,505.00
Breve panoramica:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plate Compatibility :  KB-250/250, KB-UNIVL
In giacenza - Spedizione in 1-2 giorni
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Prezzo:  zł116.00
Breve panoramica:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Prezzo:  77,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  30
  • Diameter:  20
In giacenza - Spedizione in 1-2 giorni
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Prezzo:  409,00 zł
Breve panoramica:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni