text.skipToContent text.skipToNavigation

W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła

WMP

Znaleziono 111 produkt(y/ów)

HR-X1-3P Stylus Changer Ports

ID: M00-114-213-000

Cena: zł1,201.50

Szybki podgląd: Triple stylus changer port for scanning sensor HP-S-X1S.

Related Probe: HP-S-X1S

W magazynie — wysyłka 1–2 dni

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Cena: zł3,978.00

Szybki podgląd: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Threa: M8

W magazynie — wysyłka 1–2 dni

Vee Locator

ID: FV-FEMALE

Cena: zł112.50

Szybki podgląd: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

W magazynie — wysyłka 1–2 dni

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Cena: zł139.50

Szybki podgląd: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

W magazynie — wysyłka 1–2 dni

Kinematic Fixture Plate 500x500mm (Plain)

ID: KPP-500__500

Cena: zł3,411.00

Szybki podgląd: The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Plate Compatibility : KB-400/400, KB-UNIVL

W magazynie — wysyłka 1–2 dni

Spring Clamp (M8)

ID: FX-SPRING

Cena: zł216.00

Szybki podgląd: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

W magazynie — wysyłka 1–2 dni

Kinematic Fixture Plate 300x300mm (Plain)

ID: KPP-300__300

Cena: zł2,227.50

Szybki podgląd: The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Plate Compatibility : KB-250/250, KB-UNIVL

W magazynie — wysyłka 1–2 dni

Thumb Screw M8

ID: FX-THUMB

Cena: zł40.50

Szybki podgląd: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Threa: M8

W magazynie — wysyłka 1–2 dni

Vee Block Twin

ID: FV-VEETWIN

Cena: zł189.00

Szybki podgląd: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

W magazynie — wysyłka 1–2 dni

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Cena: zł40.50

Szybki podgląd: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 20mm
Diameter: 8mm

W magazynie — wysyłka 1–2 dni

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Cena: zł72.00

Szybki podgląd: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 20mm
Diameter: 16mm

W magazynie — wysyłka 1–2 dni

Cone Adjustable (M4)

ID: FV-CONEADJ

Cena: zł63.00

Szybki podgląd: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Threa: M4

W magazynie — wysyłka 1–2 dni

Hinge Pivot With Handle

ID: FX-PR30HINGE

Cena: zł211.50

Szybki podgląd: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

W magazynie — wysyłka 1–2 dni

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Cena: zł139.50

Szybki podgląd: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

W magazynie — wysyłka 1–2 dni

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Cena: zł103.50

Szybki podgląd: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 100mm
Diameter: 16mm

W magazynie — wysyłka 1–2 dni

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Cena: zł3,127.50

Threa: M8

W magazynie — wysyłka 1–2 dni

Spring Nut (M8)

ID: FX-M8SPRGNUT

Cena: CHF31.00

Szybki podgląd: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

W magazynie — wysyłka 1–2 dni

Swift-Fix - Starter Kit

ID: FX-STARTER__KIT

Cena: CHF1,095.00

Szybki podgląd: The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.