text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
N° : I00000005
Prix:  $791.00
  • Probe Compatibility:  Absolute Arm RA7
  • Plug Type:  ODU
  • USB / LAN:  LAN
  • Scanner Compatibility:  RS3
  • Voltage:  2 255V
En stock - Livraison sous 1 à 2 jours
Single-CMM Dryer / Filter (110 V)
N° : H007622
Prix:  €1,693.00
Vue d'ensemble sommaire:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Weight:  5,7kg
En stock - Livraison sous 1 à 2 jours
Multi-CMM Dryer / Filter (110 V)
N° : H007621
Prix:  €3,184.00
Vue d'ensemble sommaire:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12bar
  • Min. Pressure:  6,9bar
  • Weight:  25kg
En stock - Livraison sous 1 à 2 jours
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  €540.00
Vue d'ensemble sommaire:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
En stock - Livraison sous 1 à 2 jours
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
N° : GB0122-0019
Prix:  €466.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
En stock - Livraison sous 1 à 2 jours
Maintenance Kit (Single-CMM)
N° : H007624
Prix:  €166.00
Vue d'ensemble sommaire:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Weight:  0,181kg
En stock - Livraison sous 1 à 2 jours
Upgrade from Filter only to Dryer / Filter
N° : H007626
Prix:  €916.00
Vue d'ensemble sommaire:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • System Compatibility:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Weight:  1,724kg
En stock - Livraison sous 1 à 2 jours
Maintenance Kit (Multi-CMM)
N° : H007625
Prix:  €221.00
Vue d'ensemble sommaire:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Weight:  0,363kg
En stock - Livraison sous 1 à 2 jours
Single-CMM Filter only (110 V)
N° : H007623
Prix: 
Vue d'ensemble sommaire:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Weight:  3,72kg
En stock - Livraison sous 1 à 2 jours
HR-X3-P Stylus Changer Port
N° : M00-114-109-000
Prix:  €160.00
  • Previous Part Number:  3 939 171
  • Related Probe:  HP-S-X3
En stock - Livraison sous 1 à 2 jours
HR-X1-3P Stylus Changer Ports
N° : M00-114-213-000
Prix:  €267.00
Vue d'ensemble sommaire:  Triple stylus changer port for scanning sensor HP-S-X1S.
  • Related Probe:  HP-S-X1S
En stock - Livraison sous 1 à 2 jours
HR-X1-P Stylus Changer Port
N° : M00-114-113-000
Prix:  €221.00
Vue d'ensemble sommaire:  Stylus changer port for HP-S-X1S, HP-S-X1H and HP-S-X1C.
  • Related Probe:  HP-S-X1H, HP-S-X1S, HP-S-X1C
En stock - Livraison sous 1 à 2 jours
HR-X1-P-SF Stylus Changer Port
N° : M00-114-167-000
Prix:  €370.00
Vue d'ensemble sommaire:  Stylus changer port with cover for HP-S-X1S, HP-S-X1H and HP-S-X1C.
  • Related Probe:  HP-S-X1S, HP-S-X1H, HP-S-X1C
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x400x12mm (M8)
N° : FX-BP300__400
Prix:  €884.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
En stock - Livraison sous 1 à 2 jours
Vee Locator
N° : FV-FEMALE
Prix:  €29.00
Vue d'ensemble sommaire:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 39 mm)
N° : FX-CTSML
Prix:  €35.00
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Vee Block Twin
N° : FV-VEETWIN
Prix:  €48.00
Vue d'ensemble sommaire:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 20 mm)
N° : FV-SO8__20
Prix:  $8.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  8mm
En stock - Livraison sous 1 à 2 jours
Cone Adjustable (M4)
N° : FV-CONEADJ
Prix:  $11.00
Vue d'ensemble sommaire:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Threa:  M4
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 66 mm)
N° : FX-CTMED
Prix:  $28.00
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours