Skip to content Skip to navigation menu

As part of our new security upgrades, you are requested to reset your password

CMM

111 Product(s) found

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)

ID: I00000005

Price: €369.00

Probe Compatibility: Absolute Arm RA7
Plug Type: ODU
USB / LAN: LAN
Scanner Compatibility: RS3
Voltage: 2,255V

In Stock - Despatched 1-2 Days

Single-CMM Dryer / Filter (110 V)

ID: H007622

Price:

Quick Overview: Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Inlet Flow: 566 L/M [20 CFM] @ 6.9 bar [100 PSI]
Max. Outlet Flow: 473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
Sweep Air Flow: 94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
Max. Air Temperature: 37° C [100° F]
Weight: 5.7kg

In Stock - Despatched 1-2 Days

Multi-CMM Dryer / Filter (110 V)

ID: H007621

Price:

Quick Overview: Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Pressure: 12bar
Min. Pressure: 6.9bar
Weight: 25kg

In Stock - Despatched 1-2 Days

Maintenance Kit (Single-CMM)

ID: H007624

Price:

Quick Overview: Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.

System Compatibility: Single-CMM Dryer / Filter (110 V) / SKU: H007622
Weight: 0.181kg

In Stock - Despatched 1-2 Days

Upgrade from Filter only to Dryer / Filter

ID: H007626

Price:

Quick Overview: The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.

System Compatibility: H007623 SINGLE-CMM FILTER ONLY (110V)
Weight: 1.724kg

In Stock - Despatched 1-2 Days

Maintenance Kit (Multi-CMM)

ID: H007625

Price:

Quick Overview: Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.

System Compatibility: Multi-CMM Dryer / Filter (110 V) / SKU: H007621
Weight: 0.363kg

In Stock - Despatched 1-2 Days

Single-CMM Filter only (110 V)

ID: H007623

Price:

Quick Overview: The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.

Weight: 3.72kg

In Stock - Despatched 1-2 Days

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Price: €550.00

Quick Overview: Adapter to allow X1 styli builds

Probe Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60mm

In Stock - Despatched 1-2 Days

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Price: €471.00

Probe Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40mm

In Stock - Despatched 1-2 Days

HR-X3-P Stylus Changer Port

ID: M00-114-109-000

Price: 164,00 €

Previous Part Number: 3,939,171
Related Probe: HP-S-X3

In Stock - Despatched 1-2 Days

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Price: 884,00 CHF

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Threa: M8

In Stock - Despatched 1-2 Days

Vee Locator

ID: FV-FEMALE

Price: 41,40 CHF

Quick Overview: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

In Stock - Despatched 1-2 Days

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Price: 41,40 CHF

Quick Overview: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

In Stock - Despatched 1-2 Days

Vee Block Twin

ID: FV-VEETWIN

Price: 59,80 CHF

Quick Overview: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

In Stock - Despatched 1-2 Days

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Price: 983,25 CHF

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Threa: M8

In Stock - Despatched 1-2 Days

Spring Pusher Standoff Clamp (D=8mm / L=10mm)

ID: FV-LATSML

Price: 49,45 CHF

Quick Overview: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Length: 10mm
Diameter: 8mm

In Stock - Despatched 1-2 Days

Swift-Fix - Bronze Kit

ID: FX-BRONZE__KIT

Price: 1 284,55 CHF

Quick Overview: The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Threa: M8
Application: CMM, Portable Measuring Arm

In Stock - Despatched 1-2 Days

Standoff (D = 8 mm / L = 25 mm)

ID: FV-SO8__25

Price: 12,65 CHF

Quick Overview: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 25mm
Diameter: 8mm

In Stock - Despatched 1-2 Days

Fixture Baseplate 400x400x12mm (M8)

ID: FX-BP400__400

Price: 1 350,10 CHF

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Threa: M8

In Stock - Despatched 1-2 Days

Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern

ID: FV-BP200__200P

Price: 708,40 CHF

Quick Overview: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Threa: M4

In Stock - Despatched 1-2 Days

Added to your shopping cart.

Previous
1(current)
2
3
4
5
Next

Product availability by store location

Hours