text.skipToContent text.skipToNavigation

Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe

CMM

112 Produit(s) trouvé(s)

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)

N° : I00000005

Prix: 424,35 CHF

Probe Compatibility: Absolute Arm RA7
Plug Type: ODU
USB / LAN: LAN
Scanner Compatibility: RS3
Voltage: 2255

En stock - Livraison sous 1 à 2 jours

Single-CMM Dryer / Filter (110 V)

N° : H007622

Prix:

Vue d'ensemble sommaire: Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Inlet Flow: 566 L/M [20 CFM] @ 6.9 bar [100 PSI]
Max. Outlet Flow: 473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
Sweep Air Flow: 94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
Max. Air Temperature: 37° C [100° F]
Weight: 5.7

En stock - Livraison sous 1 à 2 jours

Multi-CMM Dryer / Filter (110 V)

N° : H007621

Prix:

Vue d'ensemble sommaire: Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.

Max. Pressure: 12
Min. Pressure: 6.9
Weight: 25

En stock - Livraison sous 1 à 2 jours

Maintenance Kit (Single-CMM)

N° : H007624

Prix:

Vue d'ensemble sommaire: Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.

System Compatibility: Single-CMM Dryer / Filter (110 V) / SKU: H007622
Weight: 0.181

En stock - Livraison sous 1 à 2 jours

Upgrade from Filter only to Dryer / Filter

N° : H007626

Prix:

Vue d'ensemble sommaire: The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.

System Compatibility: H007623 SINGLE-CMM FILTER ONLY (110V)
Weight: 1.724

En stock - Livraison sous 1 à 2 jours

Maintenance Kit (Multi-CMM)

N° : H007625

Prix:

Vue d'ensemble sommaire: Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.

System Compatibility: Multi-CMM Dryer / Filter (110 V) / SKU: H007621
Weight: 0.363

En stock - Livraison sous 1 à 2 jours

Single-CMM Filter only (110 V)

N° : H007623

Prix:

Vue d'ensemble sommaire: The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.

Weight: 3.720

En stock - Livraison sous 1 à 2 jours

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings

N° : GB0122-0008

Prix: 560,00 CHF

Vue d'ensemble sommaire: Adapter to allow X1 styli builds

Probe Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60

En stock - Livraison sous 1 à 2 jours

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings

N° : GB0122-0019

Prix: 480,00 CHF

Probe Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40

En stock - Livraison sous 1 à 2 jours

HP-TMe-SF Probe Module (Standard Force)

N° : 03939302

Prix: 1.030,00 CHF

Vue d'ensemble sommaire: Standard force probe module of the compact 5-way touch trigger probe HP-TMe.

Part Number: 03939301
Previous Part Number: 03939171
Related Probe: HP-TMe
Probing Directions: ± X, ± Y, + Z
Stylus Mounting: M2

En stock - Livraison sous 1 à 2 jours

Fixture Baseplate 300x400x12mm (M8)

N° : FX-BP300__400

Prix: 930,00 CHF

Vue d'ensemble sommaire: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Threa: M8

En stock - Livraison sous 1 à 2 jours

Tension Clamp (L = 39 mm)

N° : FX-CTSML

Prix: 33,00 CHF

Vue d'ensemble sommaire: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

En stock - Livraison sous 1 à 2 jours

Vee Block Twin

N° : FV-VEETWIN

Prix: 47,00 CHF

Vue d'ensemble sommaire: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

En stock - Livraison sous 1 à 2 jours

Standoff (D = 8 mm / L = 20 mm)

N° : FV-SO8__20

Prix: 10,00 CHF

Vue d'ensemble sommaire: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 20
Diameter: 8

En stock - Livraison sous 1 à 2 jours

Standoff (D = 16 mm / L = 20 mm)

N° : FX-SO16__20

Prix: 18,00 CHF

Vue d'ensemble sommaire: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 20
Diameter: 16

En stock - Livraison sous 1 à 2 jours

Hinge Pivot With Handle

N° : FX-PR30HINGE

Prix: 84,00 CHF

Vue d'ensemble sommaire: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

En stock - Livraison sous 1 à 2 jours

Tension Clamp (L = 66 mm)

N° : FX-CTMED

Prix: 33,00 CHF

Vue d'ensemble sommaire: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

En stock - Livraison sous 1 à 2 jours

Standoff (D = 16 mm / L = 100 mm)

N° : FX-SO16__100

Prix: 26,00 CHF

Vue d'ensemble sommaire: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.