text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
SWIFT-SET
Azonosító: GB-0122-1000
Ár:  €6,500.00
  • Probe Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Raktáron - Kiszállítás 1-2 napon belül
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
Azonosító: GB0122-0008
Ár:  €540.00
Gyors áttekintés:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
Raktáron - Kiszállítás 1-2 napon belül
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
Azonosító: GB0122-0019
Ár:  €466.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
Raktáron - Kiszállítás 1-2 napon belül
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
Azonosító: G39031401
Ár: 
Gyors áttekintés: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

Raktáron - Kiszállítás 1-2 napon belül
Cap Screw Set M8 (L = 20 mm)
Azonosító: FX-CAPM8__20
Ár:  €17.00
Gyors áttekintés:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Threa:  M8
Raktáron - Kiszállítás 1-2 napon belül
Resting Cone (M8)
Azonosító: FX-CONE
Ár:  zł90.00
Gyors áttekintés:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Threa:  M8
Raktáron - Kiszállítás 1-2 napon belül
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Azonosító: FV-BP200__200C
Ár:  zł1,183.50
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Threa:  M4
Raktáron - Kiszállítás 1-2 napon belül
Angle Block Slider (M4)
Azonosító: FV-ANGSLIDER
Ár:  zł85.50
Gyors áttekintés:  The angle block slider enables users to position elements horizontally on the base plate.
  • Threa:  M4
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 500x500x12mm (M8)
Azonosító: FX-BP500__500
Ár:  zł6,538.50
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
Raktáron - Kiszállítás 1-2 napon belül
Fixture Baseplate 600x600x12mm (M8)
Azonosító: FX-BP600__600
Ár:  zł8,194.50
Gyors áttekintés:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff Pin (D = 8 mm / L = 10 mm)
Azonosító: FV-SO__PIN
Ár:  zł58.50
Gyors áttekintés:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Length:  10mm
  • Diameter:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Slider Block (M4)
Azonosító: FV-SLIDER
Ár:  zł67.50
Gyors áttekintés:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Threa:  M4
Raktáron - Kiszállítás 1-2 napon belül
Standoff Magnet  (D = 8 mm / L = 10 mm)
Azonosító: FV-SO__MAG
Ár:  zł63.00
Gyors áttekintés:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Length:  10mm
  • Diameter:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Spring Clamp (M4)
Azonosító: FV-SPRING
Ár:  zł198.00
Gyors áttekintés:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Threa:  M4
Raktáron - Kiszállítás 1-2 napon belül
Resting Cone (M4)
Azonosító: FV-CONE
Ár:  zł58.50
Gyors áttekintés:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Threa:  M4
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
Azonosító: FC-70SS3-NF
Ár:  zł4,005.00
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing (G):  M3
Raktáron - Kiszállítás 1-2 napon belül
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
Azonosító: FC-70SS3
Ár:  zł4,050.00
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
Kinematic Fixture Plate 500x500mm (Plain)
Azonosító: KPP-500__500
Ár:  zł3,411.00
Gyors áttekintés:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plate Compatibility :  KB-400/400, KB-UNIVL
Raktáron - Kiszállítás 1-2 napon belül
Kinematic Fixture Plate 300x300 mm (M8)
Azonosító: KPT-300__300
Ár:  zł3,505.50
Gyors áttekintés:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plate Compatibility :  KB-250/250, KB-UNIVL
Raktáron - Kiszállítás 1-2 napon belül
Kinematic Base for Fixture Plate 500x500mm
Azonosító: KB-400__400
Ár:  zł3,744.00
Gyors áttekintés:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Plate Compatibility :  KPP-500/500, KPT-500/500
Raktáron - Kiszállítás 1-2 napon belül