text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM

CMM

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
ID: I00000005
Prezzo:  $791.00
  • Probe Compatibility:  Absolute Arm RA7
  • Plug Type:  ODU
  • USB / LAN:  LAN
  • Scanner Compatibility:  RS3
  • Voltage:  2.255V
In giacenza - Spedizione in 1-2 giorni
Single-CMM Dryer / Filter (110 V)
Single-CMM Dryer / Filter (110 V)
ID: H007622
Prezzo:  $1,693.00
Breve panoramica:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Weight:  5,7kg
In giacenza - Spedizione in 1-2 giorni
Multi-CMM Dryer / Filter (110 V)
Multi-CMM Dryer / Filter (110 V)
ID: H007621
Prezzo: 
Breve panoramica:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12bar
  • Min. Pressure:  6,9bar
  • Weight:  25kg
In giacenza - Spedizione in 1-2 giorni
Maintenance Kit (Single-CMM)
Maintenance Kit (Single-CMM)
ID: H007624
Prezzo:  £166.00
Breve panoramica:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Weight:  0,181kg
In giacenza - Spedizione in 1-2 giorni
Upgrade from Filter only to Dryer / Filter
Upgrade from Filter only to Dryer / Filter
ID: H007626
Prezzo:  £916.00
Breve panoramica:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • System Compatibility:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Weight:  1,724kg
In giacenza - Spedizione in 1-2 giorni
Maintenance Kit (Multi-CMM)
Maintenance Kit (Multi-CMM)
ID: H007625
Prezzo:  £221.00
Breve panoramica:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Weight:  0,363kg
In giacenza - Spedizione in 1-2 giorni
Single-CMM Filter only (110 V)
Single-CMM Filter only (110 V)
ID: H007623
Prezzo: 
Breve panoramica:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Weight:  3,72kg
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prezzo:  £500.00
Breve panoramica:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
In giacenza - Spedizione in 1-2 giorni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prezzo:  £428.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
In giacenza - Spedizione in 1-2 giorni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prezzo:  £45.00
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prezzo:  9,00 £
Breve panoramica:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  73,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  16mm
In giacenza - Spedizione in 1-2 giorni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  £75.00
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prezzo:  £23.00
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  100mm
  • Diameter:  16mm
In giacenza - Spedizione in 1-2 giorni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prezzo:  £29.00
Breve panoramica:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prezzo:  £1,055.00
Breve panoramica:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
In giacenza - Spedizione in 1-2 giorni
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prezzo:  £53.00
Breve panoramica:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Size:  120 x 45 x 12 mmmm
In giacenza - Spedizione in 1-2 giorni
Support Stop
Support Stop
ID: FX-SUP__STOP
Prezzo:  £76.00
Breve panoramica:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Threa:  M8
In giacenza - Spedizione in 1-2 giorni
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prezzo:  47,00 £
Breve panoramica:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  20mm
  • Diameter:  16mm
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Prezzo:  38,00 £
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 150mm
In giacenza - Spedizione in 1-2 giorni