text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC

MMC

POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
POWER SUPPLY,LFVLT100-1003 (FOR G51003701)
ID: I00000005
Precio:  324,72 £
  • Probe Compatibility:  Absolute Arm RA7
  • Plug Type:  ODU
  • USB / LAN:  LAN
  • Scanner Compatibility:  RS3
  • Voltage:  2.255V
Existencias disponibles - Envío en 1-2 días
Single-CMM Dryer / Filter (110 V)
Single-CMM Dryer / Filter (110 V)
ID: H007622
Precio: 
Resumen:  Single Unit Filter / Dryer system maintains accuracy of the CMM while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Inlet Flow:  566 L/M [20 CFM] @ 6.9 bar [100 PSI]
  • Max. Outlet Flow:  473 L/M [16.7 CFM] @ 6.9 bar [100 PSI]
  • Sweep Air Flow:  94 L/M [3.3 CFM] @ 6.9 bar [100 PSI]
  • Max. Air Temperature:  37° C [100° F]
  • Weight:  5,7kg
Existencias disponibles - Envío en 1-2 días
Multi-CMM Dryer / Filter (110 V)
Multi-CMM Dryer / Filter (110 V)
ID: H007621
Precio: 
Resumen:  Multi-Machine CMM Filtration System maintains accuracy of up to four CMM’s while reducing downtime and expensive repairs. The system works by drying the air and removing oil and other contamination before entering CMM airlines and air bearings.
  • Max. Pressure:  12bar
  • Min. Pressure:  6,9bar
  • Weight:  25kg
Existencias disponibles - Envío en 1-2 días
Maintenance Kit (Single-CMM)
Maintenance Kit (Single-CMM)
ID: H007624
Precio: 
Resumen:  Maintenance Kit for Single-CMM Dryer / Filter system (110 V) provides an annual supply of filter and O-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Single-CMM Dryer / Filter (110 V) / SKU: H007622
  • Weight:  0,181kg
Existencias disponibles - Envío en 1-2 días
Upgrade from Filter only to Dryer / Filter
Upgrade from Filter only to Dryer / Filter
ID: H007626
Precio: 
Resumen:  The Membrane Dryer serves as an upgrade to the H007623 Single Unit CMM Filtration System.
  • System Compatibility:  H007623 SINGLE-CMM FILTER ONLY (110V)
  • Weight:  1,724kg
Existencias disponibles - Envío en 1-2 días
Maintenance Kit (Multi-CMM)
Maintenance Kit (Multi-CMM)
ID: H007625
Precio: 
Resumen:  Maintenance kit for Multi-CMM Dryer / Filter System (110 V) provides an annual supply of filter and o-ring replacement parts for performing biannual maintenance.
  • System Compatibility:  Multi-CMM Dryer / Filter (110 V) / SKU: H007621
  • Weight:  0,363kg
Existencias disponibles - Envío en 1-2 días
Single-CMM Filter only (110 V)
Single-CMM Filter only (110 V)
ID: H007623
Precio: 
Resumen:  The Single Unit CMM Filtration System maintains accuracy of the CMM while reducing downtime and expensive repairs.
  • Weight:  3,72kg
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  £466.00
Resumen:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  £402.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  £41.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Precio:  £8.00
Resumen:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Threa:  M8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  €16.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  16mm
Existencias disponibles - Envío en 1-2 días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  47,00 €
Resumen:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  23,00 €
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  100mm
  • Diameter:  16mm
Existencias disponibles - Envío en 1-2 días
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  31,00 €
Resumen:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Precio:  1.095,00 €
Resumen:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
Existencias disponibles - Envío en 1-2 días
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Precio:  54,00 €
Resumen:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Size:  120 x 45 x 12 mmmm
Existencias disponibles - Envío en 1-2 días
Support Stop
Support Stop
ID: FX-SUP__STOP
Precio:  83,00 €
Resumen:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Threa:  M8
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Precio:  €42.00
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  20mm
  • Diameter:  16mm
Existencias disponibles - Envío en 1-2 días
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Precio:  €41.00
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 150mm
Existencias disponibles - Envío en 1-2 días