text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog
  3. WMP
  4. Rozwiązania montażowe

Rozwiązania montażowe

Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  884,00 CHF
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  25,00 CHF
Szybki podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie — wysyłka 1–2 dni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  42,00 CHF
Szybki podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
W magazynie — wysyłka 1–2 dni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  236,00 CHF
Szybki podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Kompatybilność płyty:  FV-200-200C, FV-200/200F, FV-200/200P
W magazynie — wysyłka 1–2 dni
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Cena:  9,00 CHF
Szybki podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  15mm
  • Średnica:  8mm
W magazynie — wysyłka 1–2 dni
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Cena:  2 116,00 CHF
Szybki podgląd:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Gwint:  M4
  • Zastosowanie:  Multisensor CMM
W magazynie — wysyłka 1–2 dni
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Cena:  49,00 CHF
Szybki podgląd:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
W magazynie — wysyłka 1–2 dni
Vee Block Single
Vee Block Single
ID: FV-VEE
Cena:  29,00 CHF
Szybki podgląd:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
W magazynie — wysyłka 1–2 dni
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Cena:  15,00 CHF
Szybki podgląd:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Cena:  453,00 CHF
Szybki podgląd:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne ramiona pomiarowe
W magazynie — wysyłka 1–2 dni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Cena:  337,00 CHF
Szybki podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Cena:  83,00 CHF
Szybki podgląd:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Cena:  15,00 CHF
Szybki podgląd:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Cena:  14,00 CHF
Szybki podgląd:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Długość:  10mm
  • Średnica:  8mm
W magazynie — wysyłka 1–2 dni
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Cena:  44,00 CHF
Szybki podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Cena:  13,00 CHF
Szybki podgląd:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Cena:  890,00 CHF
Szybki podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Średnica zewnętrzna uchwytu (D1):  70mm
  • Zakres mocowania zewnętrznego (A):  1 - 71mm
  • Zakres mocowania wewnętrznego (I):  18 - 66mm
  • Mocowanie (G):  M3
W magazynie — wysyłka 1–2 dni
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
ID: FC-70SS3
Cena:  900,00 CHF
Szybki podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Średnica zewnętrzna uchwytu (D1):  70mm
  • Zakres mocowania zewnętrznego (A):  1 - 71mm
  • Zakres mocowania wewnętrznego (I):  18 - 66mm
  • Mocowanie:  M4 / M8
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  31,00 CHF
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Cena:  48,00 CHF
Szybki podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni