text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog
  3. WMP
  4. Rozwiązania montażowe

Rozwiązania montażowe

Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  41,40 CHF
Szybki podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie — wysyłka 1–2 dni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Cena:  760,15 CHF
Szybki podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Cena:  21,85 CHF
Szybki podgląd:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Cena:  21,85 CHF
Szybki podgląd:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Długość:  10mm
  • Średnica:  8mm
W magazynie — wysyłka 1–2 dni
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Cena:  58,65 CHF
Szybki podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Cena:  19,55 CHF
Szybki podgląd:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Cena:  1 179,90 CHF
Szybki podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Średnica zewnętrzna uchwytu (D1):  70mm
  • Zakres mocowania zewnętrznego (A):  1 - 71mm
  • Zakres mocowania wewnętrznego (I):  18 - 66mm
  • Mocowanie (G):  M3
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  1 179,90 CHF
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  41,40 CHF
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  59,80 CHF
Szybki podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
W magazynie — wysyłka 1–2 dni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Cena:  64,40 CHF
Szybki podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Cena:  21,85 CHF
Szybki podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  20mm
  • Średnica:  16mm
W magazynie — wysyłka 1–2 dni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Cena:  106,95 CHF
Szybki podgląd:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  41,40 CHF
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  983,25 CHF
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Cena:  33,35 CHF
Szybki podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  100mm
  • Średnica:  16mm
W magazynie — wysyłka 1–2 dni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Cena:  41,40 CHF
Szybki podgląd:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
W magazynie — wysyłka 1–2 dni
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Cena:  75,90 CHF
Szybki podgląd:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Wymiar:  120 x 45 x 12 mmmm
W magazynie — wysyłka 1–2 dni
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Cena:  1 520,30 CHF
Szybki podgląd:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne ramiona pomiarowe
W magazynie — wysyłka 1–2 dni
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Cena:  67,85 CHF
Szybki podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Długość:  20mm
  • Średnica:  16mm
W magazynie — wysyłka 1–2 dni