text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: 03939482
Prijs:  2 182,00 £
Beknopt overzicht:  6-port probe module changer rack with a height of 150 mm
  • Ilość Portów:  6
  • Wysokość:  148
Op voorraad – Verzendtijd 1-2 dagen
ID: 03939486
Prijs:  773,00 £
Beknopt overzicht:  3-port module compatible with HP-TM and HP-THD probe modules
  • Ilość Portów:  3
  • Sonda Powiązana:  HP-TM, HP-THD
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969364
Prijs:  1 555,00 £
  • Długość (L):  300
  • Materiał:  Włókno Węglowe / Stal Nierdzewna
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969368
Prijs:  1 582,00 £
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969367
Prijs:  378,00 £
Op voorraad – Verzendtijd 1-2 dagen
ID: 03939480
Prijs:  1 991,00 £
Beknopt overzicht:  3-Port probe module changer rack with a height of 90 mm
  • Ilość Portów:  3
  • Wysokość:  88
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969393
Prijs:  709,00 £
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969391
Prijs:  709,00 £
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969077
Prijs:  573,00 £
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969066
Prijs:  199,00 £
  • Długość (L):  100
  • Materiał:  Aluminium
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969486
Prijs:  157,00 £
Beknopt overzicht:  110 mm support pillar for a total height of 200 mm
  • Długość:  110
  • Średnica:  19.5
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969487
Prijs:  157,00 £
Beknopt overzicht:  160 mm support pillar for a total height of 250 mm
  • Długość:  160
  • Średnica:  19.5
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969488
Prijs:  47,00 £
Beknopt overzicht:  Safety / locking pin for the 3-port probe module and arm of the rack
  • Długość:  22
  • Średnica:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969485
Prijs:  157,00 £
Beknopt overzicht:  60 mm support pillar for a total height of 150 mm.
  • Długość:  60
  • Średnica:  19.5
Op voorraad – Verzendtijd 1-2 dagen
ID: 03969650
Prijs:  15,00 £
Beknopt overzicht:  Putty for cleaning dust and dirt from parts, devices and measurement equipment.
Op voorraad – Verzendtijd 1-2 dagen
ID: C55918029
Prijs:  447,00 £
Beknopt overzicht: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.

Op voorraad – Verzendtijd 1-2 dagen
ID: FX-BP300__400
Prijs:  818,00 £
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-CTSML
Prijs:  29,00 £
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-FEMALE
Prijs:  29,00 £
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-VEETWIN
Prijs:  42,00 £
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen