Accessoires

Short description Text

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank JIS BT40 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 70 mm /  2.75"

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool. Shank length: 70 mm

Hollow taper shank HSK40 for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Taper shank JIS BT30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Hollow taper shank HSK63 Form E for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Hollow taper shank HSK50 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Hollow taper shank HSK50 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.

Taper shank JIS BT40 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 15 m / 49.2'

Extension cable for Hexagon Sensor cables with M12/F12 plug. Length: 10 m (32.8')

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.