text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
SWIFT-SET
ID: GB-0122-1000
Prijs:  5 720,00 £
  • Kompatybilność:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  466,00 £
Beknopt overzicht:  Adapter to allow X1 styli builds
  • Kompatybilność:  HP-S-X1 Stylus Clampings
  • Średnica:  60mm
Op voorraad – Verzendtijd 1-2 dagen
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  402,00 £
  • Kompatybilność:  HP-S-X3 Stylus Clampings
  • Średnica:  40mm
Op voorraad – Verzendtijd 1-2 dagen
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
ID: FC-70SS3
Prijs:  776,00 £
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Średnica zewnętrzna uchwytu (D1):  70mm
  • Zakres mocowania zewnętrznego (A):  1 - 71mm
  • Zakres mocowania wewnętrznego (I):  18 - 66mm
  • Mocowanie:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
Spring Clamp (M8)
ID: FX-SPRING
Prijs:  41,00 £
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  762,00 £
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  27,00 £
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Vee Locator
ID: FV-FEMALE
Prijs:  22,00 £
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Twin
ID: FV-VEETWIN
Prijs:  36,00 £
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Prijs:  15,00 £
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  50mm
  • Średnica:  20mm
Op voorraad – Verzendtijd 1-2 dagen
Spring Plunger
ID: FX-PLUNGER
Prijs:  78,00 £
Beknopt overzicht:  The spring plunger exerts low forces to hold sensible parts in position.
  • Gwint:  M8
Op voorraad – Verzendtijd 1-2 dagen
Toggle Clamp
ID: FX-TOG
Prijs:  92,00 £
Beknopt overzicht:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Gwint:  M8
Op voorraad – Verzendtijd 1-2 dagen
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  27,00 £
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prijs:  £28.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Długość:  10mm
  • Średnica:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prijs:  £36.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Długość:  20mm
  • Średnica:  16mm
Op voorraad – Verzendtijd 1-2 dagen
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prijs:  £834.00
Beknopt overzicht:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne ramiona pomiarowe
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  £8.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  25mm
  • Średnica:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  £12.00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Długość:  6mm
  • Średnica:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prijs:  £872.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
Op voorraad – Verzendtijd 1-2 dagen
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Prijs:  £227.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Gwint:  M4
Op voorraad – Verzendtijd 1-2 dagen