text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
ID: GB-0122-1000
Cena:  5 720,00 £
  • Kompatybilność:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
W magazynie — wysyłka 1–2 dni
ID: GB0122-0008
Cena:  551,76 £
Szybki podgląd:  Adapter to allow X1 styli builds
  • Kompatybilność:  HP-S-X1 Stylus Clampings
  • Średnica:  60mm
W magazynie — wysyłka 1–2 dni
ID: GB0122-0019
Cena:  472,56 £
  • Kompatybilność:  HP-S-X3 Stylus Clampings
  • Średnica:  40mm
W magazynie — wysyłka 1–2 dni
ID: G39031401
Cena:  778,80 £
Szybki podgląd: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

  • Numer części:  1234567890734343
W magazynie — wysyłka 1–2 dni
ID: FV-FEMALE
Cena:  31,68 £
Szybki podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie — wysyłka 1–2 dni
ID: FV-GUIDE480
Cena:  255,20 £
Szybki podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Kompatybilność płyty:  FV-200-200C, FV-200/200F, FV-200/200P
W magazynie — wysyłka 1–2 dni
ID: FV-CONEADJ
Cena:  21,12 £
Szybki podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
ID: FV-LATSML
Cena:  37,84 £
Szybki podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Długość:  10mm
  • Średnica:  8mm
W magazynie — wysyłka 1–2 dni
ID: FV-BP200__200P
Cena:  542,08 £
Szybki podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
ID: FV-MALE
Cena:  22,88 £
Szybki podgląd:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
ID: FV-CNRBRKT
Cena:  50,16 £
Szybki podgląd:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
W magazynie — wysyłka 1–2 dni
ID: FV-POST
Cena:  18,48 £
Szybki podgląd:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
ID: FV-BP200__200F
Cena:  581,68 £
Szybki podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
ID: FV-SLIDER
Cena:  16,72 £
Szybki podgląd:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni
ID: FX-CAPM8__20
Cena:  18,48 £
Szybki podgląd:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni
ID: FX-BP500__500
Cena:  1 474,88 £
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni
ID: FX-PR30__100
Cena:  38,72 £
Szybki podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Wymiar:  30 x 30 x 100mm
W magazynie — wysyłka 1–2 dni
ID: FX-PR30__250
Cena:  48,40 £
Szybki podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Wymiar:  30 x 30 x 250mm
W magazynie — wysyłka 1–2 dni
ID: FX-PR30__50
Cena:  36,96 £
Szybki podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Wymiar:  30 x 30 x 50mm
W magazynie — wysyłka 1–2 dni
ID: FX-BP600__600
Cena:  1 846,24 £
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni