text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

Kinematic Fixture Plate 300x300mm (Plain)
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
Prezzo:  2 739,83 zł

2 227,50 zł
Breve panoramica:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Kompatybilność płyty:  KB-250/250, KB-UNIVL
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  4 892,94 zł

3 978,00 zł
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
In giacenza - Spedizione in 1-2 giorni
Kinematic Fixture Plate 500x500mm (Plain)
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Prezzo:  4 195,53 zł

3 411,00 zł
Breve panoramica:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Kompatybilność płyty:  KB-400/400, KB-UNIVL
In giacenza - Spedizione in 1-2 giorni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  171,59 zł

139,50 zł
Breve panoramica:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Vee Locator
Vee Locator
ID: FV-FEMALE
Prezzo:  138,38 zł

112,50 zł
Breve panoramica:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
In giacenza - Spedizione in 1-2 giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  232,47 zł

189,00 zł
Breve panoramica:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In giacenza - Spedizione in 1-2 giorni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prezzo:  265,68 zł

216,00 zł
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prezzo:  49,82 zł

40,50 zł
Breve panoramica:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Gwint:  M8
In giacenza - Spedizione in 1-2 giorni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prezzo:  1 306,26 zł

1 062,00 zł
Breve panoramica:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Kompatybilność płyty:  FV-200-200C, FV-200/200F, FV-200/200P
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prezzo:  49,82 zł

40,50 zł
Breve panoramica:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  20mm
  • Średnica:  8mm
In giacenza - Spedizione in 1-2 giorni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prezzo:  77,49 zł

63,00 zł
Breve panoramica:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Gwint:  M4
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  88,56 zł

72,00 zł
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  20mm
  • Średnica:  16mm
In giacenza - Spedizione in 1-2 giorni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  260,15 zł

211,50 zł
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  171,59 zł

31,00 €
Breve panoramica:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prezzo:  695,00 €
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prezzo:  23,00 €
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  100mm
  • Średnica:  16mm
In giacenza - Spedizione in 1-2 giorni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prezzo:  31,00 €
Breve panoramica:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
In giacenza - Spedizione in 1-2 giorni
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prezzo:  54,00 €
Breve panoramica:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Wymiar:  120 x 45 x 12 mmmm
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Prezzo:  1.095,00 €
Breve panoramica:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Gwint:  M8
  • Zastosowanie:  WMP, Przenośne ramiona pomiarowe
In giacenza - Spedizione in 1-2 giorni
Support Stop
Support Stop
ID: FX-SUP__STOP
Prezzo:  83,00 €
Breve panoramica:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Gwint:  M8
In giacenza - Spedizione in 1-2 giorni