Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheits-Upgrades werden Sie aufgefordert, Ihr Passwort zurückzusetzen
  1. Home
  2. Katalog
  3. KMG
  4. Spannmittel

Spannmittel

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Preis:  6 500,00 €
  • Kompatybilność:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Auf Lager – Versand 1–2 Tage
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Preis:  540,00 €
Schnellübersicht:  Adapter to allow X1 styli builds
  • Kompatybilność:  HP-S-X1 Stylus Clampings
  • Średnica:  60mm
Auf Lager – Versand 1–2 Tage
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Preis:  466,00 €
  • Kompatybilność:  HP-S-X3 Stylus Clampings
  • Średnica:  40mm
Auf Lager – Versand 1–2 Tage
Kinematic Support Kit
Kinematic Support Kit
ID: FX-KINKIT
Preis:  251,00 €
Schnellübersicht:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
Auf Lager – Versand 1–2 Tage
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Preis:  263,00 €
Schnellübersicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Gwint:  M4
Auf Lager – Versand 1–2 Tage
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Preis:  1 453,00 €
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
Auf Lager – Versand 1–2 Tage
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Preis:  1 821,00 €
Schnellübersicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
Auf Lager – Versand 1–2 Tage
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Preis:  13,00 €
Schnellübersicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Długość:  10mm
  • Średnica:  8mm
Auf Lager – Versand 1–2 Tage
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Preis:  49,00 €
Schnellübersicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Auf Lager – Versand 1–2 Tage
Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Preis:  91,00 €
Schnellübersicht:  The spring plunger exerts low forces to hold sensible parts in position.
  • Gwint:  M8
Auf Lager – Versand 1–2 Tage
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
Preis:  60,00 €
Schnellübersicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Długość:  20mm
  • Średnica:  20mm
Auf Lager – Versand 1–2 Tage
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Preis:  337,00 €
Schnellübersicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Gwint:  M4
Auf Lager – Versand 1–2 Tage
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Preis:  83,00 €
Schnellübersicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Gwint:  M8
Auf Lager – Versand 1–2 Tage
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Preis:  15,00 CHF
Schnellübersicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Gwint:  M4
Auf Lager – Versand 1–2 Tage
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Preis:  14,00 CHF
Schnellübersicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Długość:  10mm
  • Średnica:  8mm
Auf Lager – Versand 1–2 Tage
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Preis:  44,00 CHF
Schnellübersicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Gwint:  M4
Auf Lager – Versand 1–2 Tage
Kinematic Support Kit Plus
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Preis:  263,00 CHF
Schnellübersicht:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Auf Lager – Versand 1–2 Tage
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Preis:  13,00 CHF
Schnellübersicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Gwint:  M4
Auf Lager – Versand 1–2 Tage
Kinematic Base for Fixture Plate 500x500mm
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
Preis:  832,00 CHF
Schnellübersicht:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Kompatybilność płyty:  KPP-500/500, KPT-500/500
Auf Lager – Versand 1–2 Tage
Kinematic Base for Fixture Plate 300x300mm
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
Preis:  589,00 CHF
Schnellübersicht:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Kompatybilność płyty:  KPP-300/300, KPT-300/300
Auf Lager – Versand 1–2 Tage