text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
ID: GB-0122-1000
Cena:  6 500,00 €
  • Kompatybilność:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
W magazynie — wysyłka 1–2 dni
ID: GB0122-0008
Cena:  540,00 €
Szybki podgląd:  Adapter to allow X1 styli builds
  • Kompatybilność:  HP-S-X1 Stylus Clampings
  • Średnica:  60mm
W magazynie — wysyłka 1–2 dni
ID: GB0122-0019
Cena:  466,00 €
  • Kompatybilność:  HP-S-X3 Stylus Clampings
  • Średnica:  40mm
W magazynie — wysyłka 1–2 dni
ID: G39031401
Cena:  776,00 €
Szybki podgląd: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

  • Numer części:  1234567890734343
W magazynie — wysyłka 1–2 dni
ID: 03969077
Cena:  590,00 €
W magazynie — wysyłka 1–2 dni
ID: 03939303
Cena:  1 010,00 €
W magazynie — wysyłka 1–2 dni
ID: 03969066
Cena:  206,00 €
  • Długość (L):  100mm
  • Materiał:  Aluminium
W magazynie — wysyłka 1–2 dni
ID: 03969394
Cena:  2 580,00 €
W magazynie — wysyłka 1–2 dni
ID: 03969360
Cena:  550,00 €
  • Długość (L):  50mm
  • Materiał:  Aluminium / Stal
W magazynie — wysyłka 1–2 dni
ID: 03939542
Cena:  7 560,00 zł
Szybki podgląd:  Calibration sphere for use with laser scanners for machine tools.
W magazynie — wysyłka 1–2 dni
ID: 03969487
Cena:  747,00 zł
Szybki podgląd:  160 mm support pillar for a total height of 250 mm
  • Długość:  160mm
  • Średnica:  19.5mm
W magazynie — wysyłka 1–2 dni
ID: 03969488
Cena:  225,00 zł
Szybki podgląd:  Safety / locking pin for the 3-port probe module and arm of the rack
  • Długość:  22mm
  • Średnica:  8mm
W magazynie — wysyłka 1–2 dni
ID: 03969485
Cena:  747,00 zł
Szybki podgląd:  60 mm support pillar for a total height of 150 mm.
  • Długość:  60mm
  • Średnica:  19.5mm
W magazynie — wysyłka 1–2 dni
ID: FX-BP300__400
Cena:  3 888,00 zł
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Gwint:  M8
W magazynie — wysyłka 1–2 dni
ID: FX-CTSML
Cena:  138,00 zł
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
ID: FV-FEMALE
Cena:  138,00 zł
Szybki podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie — wysyłka 1–2 dni
ID: FV-VEETWIN
Cena:  199,00 zł
Szybki podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
W magazynie — wysyłka 1–2 dni
ID: FV-GUIDE480
Cena:  1 097,00 zł
Szybki podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Kompatybilność płyty:  FV-200-200C, FV-200/200F, FV-200/200P
W magazynie — wysyłka 1–2 dni
ID: FV-SO8__20
Cena:  43,00 zł
Szybki podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Długość:  20mm
  • Średnica:  8mm
W magazynie — wysyłka 1–2 dni
ID: FV-CONEADJ
Cena:  91,00 zł
Szybki podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Gwint:  M4
W magazynie — wysyłka 1–2 dni