Shanks

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud AZ-01.

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Taper shank DIN ISO 7388 SK50 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 76 mm / 2.99"

Taper shank JIS BT40 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 70 mm /  2.75"

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool. Shank length: 70 mm

Hollow taper shank HSK40 for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Taper shank JIS BT30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Thermal insulated hollow taper shank HSK63 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK32 Form E for use with Hexagon touch probes with D16 connection and bidirectional activation in the machine tool.

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank JIS BT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.