text.skipToContent text.skipToNavigation

Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password

CMM

156 prodotto/i trovato/i

HA-M-200 Probe Extension M8 (L = 200 mm)

ID: 03969067

Prezzo: 342,00 €

Długość (L): 200
Materiał: Aluminium

In giacenza - Spedizione in 1-2 giorni

HA-M-50 Probe Extension M8 (L = 50 mm)

ID: 03969065

Prezzo: 258,00 €

Długość (L): 50
Materiał: Aluminium

In giacenza - Spedizione in 1-2 giorni

HA-M Probe Extension Kit M8

ID: 03969077

Prezzo: 866,00 €

In giacenza - Spedizione in 1-2 giorni

HA-M-100 Probe Extension M8 (L = 100 mm)

ID: 03969066

Prezzo: 300,00 €

Długość (L): 100
Materiał: Aluminium

In giacenza - Spedizione in 1-2 giorni

HR-SP-110 Rack Extension (L = 110 mm)

ID: 03969486

Prezzo: 197,00 €

Breve panoramica: 110 mm support pillar for a total height of 200 mm

Długość: 110
Średnica: 19.5

In giacenza - Spedizione in 1-2 giorni

HR-SP-160 Rack Extension (L = 160 mm)

ID: 03969487

Prezzo: 197,00 €

Breve panoramica: 160 mm support pillar for a total height of 250 mm

Długość: 160
Średnica: 19.5

In giacenza - Spedizione in 1-2 giorni

Safety Pin for HR-MP Rack

ID: 03969488

Prezzo: 59,00 €

Breve panoramica: Safety / locking pin for the 3-port probe module and arm of the rack

Długość: 22
Średnica: 8

In giacenza - Spedizione in 1-2 giorni

HR-SP-60 Rack Extension (L = 60 mm)

ID: 03969485

Prezzo: 197,00 €

Breve panoramica: 60 mm support pillar for a total height of 150 mm.

Długość: 60
Średnica: 19.5

In giacenza - Spedizione in 1-2 giorni

Cleaning Putty

ID: 03969650

Prezzo: 21,00 €

Breve panoramica: Putty for cleaning dust and dirt from parts, devices and measurement equipment.

In giacenza - Spedizione in 1-2 giorni

Ceramic Calibration Sphere (D = 25 mm)

ID: C55918029

Prezzo: 561,00 €

Breve panoramica:

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.

In giacenza - Spedizione in 1-2 giorni

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Prezzo: 1 060,00 €

Breve panoramica: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Gwint: M8

In giacenza - Spedizione in 1-2 giorni

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Prezzo: 38,00 €

Breve panoramica: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

In giacenza - Spedizione in 1-2 giorni

Vee Locator

ID: FV-FEMALE

Prezzo: 38,00 €

Breve panoramica: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

In giacenza - Spedizione in 1-2 giorni

Vee Block Twin

ID: FV-VEETWIN

Prezzo: 54,00 €

Breve panoramica: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

In giacenza - Spedizione in 1-2 giorni

Guide Rail (L = 480 mm)

ID: FV-GUIDE480

Prezzo: 254,00 €

Breve panoramica: The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.

Kompatybilność płyty: FV-200-200C, FV-200/200F, FV-200/200P

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prezzo: 10,00 €

Breve panoramica: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.