text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: 2951
Prijs:  CHF 7,00
Beknopt overzicht:  C-Spanner for the exchange of measuring units on probes for machine tools.
  • Materiaal:  Tempered Steel
  • Lengte:  136
Op voorraad – Verzendtijd 1-2 dagen
ID: 3079
Prijs:  CHF 207,00
Beknopt overzicht:  Dial gauge with housing Ø40 mm, measuring range 0.2 mm, analogue display with reading in mm. For use with measuring systems on machine tools.
  • Measurement Technology:  Analogue
  • Measuring Unit:  mm
  • Meetbereik:  0.2 mm
  • Reading:  0.002 mm
  • Kogel diameter:  2
Op voorraad – Verzendtijd 1-2 dagen
ID: 35.20-TB
Prijs:  CHF 57,00
Beknopt overzicht:  Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
Op voorraad – Verzendtijd 1-2 dagen
ID: 3D-FI EICHKUGEL SET5
Prijs:  CHF 1.930,00
Beknopt overzicht:  Calibration set for use on machine tools. For contents, see description.
Op voorraad – Verzendtijd 1-2 dagen
ID: 40.02-TB
Prijs:  CHF 32,00
Beknopt overzicht:  Tool kit for installation and maintenance of Infrared Touch Probe IRP40.02. Tool box contents see description.
Op voorraad – Verzendtijd 1-2 dagen
ID: 40.01-TB
Prijs:  CHF 23,00
Beknopt overzicht:  Tool kit for installation and maintenance of Infrared Touch Probe IRP40.01. Tool box contents see description.
Op voorraad – Verzendtijd 1-2 dagen
ID: 0885
Prijs:  CHF 13,00
Beknopt overzicht:  Mounting pin for the safe mounting of styli on measuring systems for machine tools.
Op voorraad – Verzendtijd 1-2 dagen
ID: 35.65-LTS23-TB
Prijs:  CHF 6,00
Beknopt overzicht:  Tool kit for installation and maintenance of Laser Tool Setter LTS35.65-23. Tool box contents see description.
Op voorraad – Verzendtijd 1-2 dagen
ID: 3D-FI SUPPORT BASE
Prijs:  CHF 103,00
Beknopt overzicht:  Support base with 45° and 60° angle for calibration balls for machine tools.
  • Diameter:  64
Op voorraad – Verzendtijd 1-2 dagen
ID: 4316
Prijs:  CHF 6,00
Beknopt overzicht:  Battery (3.6 V / 1/2AA) for use in measurement devices for machine tools.
  • Grootte:  1/2 AA
  • Voltage:  3.6
  • Capacity:  1200
  • Compatibiliteit:  IRP40.01, IRP40.02, IRP40.40-LF, IRP40.42, IRT35.70, IRT35.71, RWP38.41, RWT35.40, RWT35.50
Op voorraad – Verzendtijd 1-2 dagen
ID: 4274
Prijs:  CHF 7,00
Beknopt overzicht:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Materiaal:  Tempered Steel
  • Internal Thread:  M12
  • Nominale T-groefmaat:  14
Op voorraad – Verzendtijd 1-2 dagen
ID: 5248
Prijs:  CHF 49,00
Beknopt overzicht:  M8-Extension for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Outside Thread:  M8
  • Inside Thread:  M8
  • Diameter:  25
  • Lengte:  75
  • Materiaal:  Roestvast staal
Op voorraad – Verzendtijd 1-2 dagen
ID: 5309
Prijs:  CHF 4,00
Beknopt overzicht:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Grootte:  9 V Block
  • Voltage:  9
  • Capacity:  1200
  • Compatibiliteit:  IRP40.50
Op voorraad – Verzendtijd 1-2 dagen
ID: 41.00-VE200
Prijs:  CHF 356,00
Beknopt overzicht:  Extension made of carbon fibre, Ø25 mm, length 200 mm. Used to extend the length of measuring units on machine tools.
  • Materiaal:  Koolstofvezel
  • Lengte:  200
  • Diameter:  25
  • External Thread:  M16x1
Op voorraad – Verzendtijd 1-2 dagen
ID: CALIBRATION SET 18
Prijs:  CHF 500,00
Beknopt overzicht:  Calibration set for use on machine tools. For contents, see description.
Op voorraad – Verzendtijd 1-2 dagen
ID: D16-HSK25E-B
Prijs:  CHF 436,00
Beknopt overzicht: 

Hollow taper shank HSK25 Form E for use with Hexagon touch probes with D16 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-C4-B
Prijs:  CHF 790,00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-HSK40-TI-B
Prijs:  CHF 1.130,00
Beknopt overzicht: 

Thermal insulated hollow taper shank HSK40 for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-HSK40A-B
Prijs:  CHF 459,00
Beknopt overzicht: 

Hollow taper shank HSK40 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D20-C8-B
Prijs:  CHF 1.220,00
Beknopt overzicht: 

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen