text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: FV-SLIDE
Prijs:  zł1,806.00
Beknopt overzicht:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200C
Prijs:  zł2,451.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Onderdeelnummer:  FV-AB190/200F
  • Schroefdraad:  M4
  • Previous Part Number:  FV-AB180/200F
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-ANGSLIDER
Prijs:  zł95.00
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO__PIN
Prijs:  zł82.00
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CNRBRKT
Prijs:  zł224.00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-POST
Prijs:  zł82.00
Beknopt overzicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200F
Prijs:  zł2,580.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SLIDER
Prijs:  zł77.00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO__MAG
Prijs:  zł77.00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SPRING
Prijs:  zł198.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONE
Prijs:  zł65.00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3-NF
Prijs:  zł3,999.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
ID: H000115
Prijs:  zł705.00
Beknopt overzicht: 
3 Axis Joystick for Hexagon Universal Jogbox (UJB).
Op voorraad – Verzendtijd 1-2 dagen
ID: M00-153-285-000
Prijs:  zł1,329.00
Beknopt overzicht:  Stylus changer port for HP-S-X5, HP-S-X5 HD, LSP-S2 and LSP-S4
  • Bijbehorende Taster:  HP-S-X5, HP-S-X5 HD, LSP-S2, LSP-S4
Op voorraad – Verzendtijd 1-2 dagen
ID: M00-114-167-000
Prijs:  zł1,634.00
Beknopt overzicht:  Stylus changer port with cover for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.
  • Bijbehorende Taster:  HP-S-X1S, HP-S-X1H, HP-S-X1C
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3
Prijs:  zł4,042.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
ID: C55918029
Prijs:  zł2,116.00
Beknopt overzicht: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.

Op voorraad – Verzendtijd 1-2 dagen
ID: M00-114-213-000
Prijs:  zł1,178.00
Beknopt overzicht:  Triple stylus changer port for scanning sensor HP-S-X1S.
  • Bijbehorende Taster:  HP-S-X1S
Op voorraad – Verzendtijd 1-2 dagen
ID: M00-114-113-000
Prijs:  zł976.00
Beknopt overzicht:  Stylus changer port for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.
  • Bijbehorende Taster:  HP-S-X1H, HP-S-X1S, HP-S-X1C
Op voorraad – Verzendtijd 1-2 dagen
ID: 03939482
Prijs:  zł10,320.00
Beknopt overzicht:  6-port probe module changer rack with a height of 150 mm
  • Aantal poorten:  6
  • Hoogte:  148
  • Botsingsbescherming:  Ja
Op voorraad – Verzendtijd 1-2 dagen