text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus

Catalogus

Probe with fixed ball (SS-10-C-130)
Probe with fixed ball (SS-10-C-130)
ID: H00000383-10
Prijs:  £ 487,00
Beknopt overzicht:  130 mm carbon probe with glue-mounted stainless steel ball Ø10 mm. For use with all Absolute Arm models.
  • Onderdeelnummer:  H00000383-10
  • Kogel diameter:  10
  • Lengte:  130
Levertijd > 25 dagen
Probe with M3-Pointer Stylus (C-85)
Probe with M3-Pointer Stylus (C-85)
ID: 54397-03
Prijs:  £ 487,00
Beknopt overzicht:  85 mm carbon probe with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Onderdeelnummer:  54397-03
  • Lengte:  85
Levertijd > 25 dagen
Probe with fixed ball (SS-9.525-C-82)
Probe with fixed ball (SS-9.525-C-82)
ID: H00000383-06
Prijs:  £ 487,00
Beknopt overzicht:  82 mm carbon probe with glue-mounted stainless steel ball Ø9.5 mm. For use with all Absolute Arm models.
  • Onderdeelnummer:  H00000383-06
  • Kogel diameter:  9.525
  • Lengte:  82
Levertijd > 25 dagen
Probe with fixed ball (SS-9.5-SS-50)
Probe with fixed ball (SS-9.5-SS-50)
ID: H00000906-01
Prijs:  £ 649,00
Beknopt overzicht:  50 mm stainless steel probe with glue-mounted stainless steel ball Ø9.5 mm. For use with all Absolute Arm models.
  • Onderdeelnummer:  H00000906-01
  • Kogel diameter:  9.5
  • Lengte:  50
Levertijd > 25 dagen
Angle Probe 45DEG with M3-Pointer Stylus (TC-10)
Angle Probe 45DEG with M3-Pointer Stylus (TC-10)
ID: H00033800-01
Prijs:  £ 755,00
Beknopt overzicht:  Angled probe (45°) with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Onderdeelnummer:  H00033800-01
  • Hoek:  45
  • Offset (Y):  38
  • Lengte:  149
  • Beschermingsklasse:  IP54
Levertijd > 25 dagen
Angle Probe 90DEG with M3-Stylus (R-4-SS-2.5-L10)
Angle Probe 90DEG with M3-Stylus (R-4-SS-2.5-L10)
ID: H00033800-11
Prijs:  £ 755,00
Beknopt overzicht:  Angled probe (90°) with mounted M3-Stylus, tip Ø4 mm. For use with all Absolute Arm models.
  • Onderdeelnummer:  H00033800-11
  • Hoek:  90
  • Kogel diameter:  4
  • Offset (Y):  43
  • Lengte:  173
Levertijd > 25 dagen
Target D1=15 mm retro coded No. 151-500 (M)
Target D1=15 mm retro coded No. 151-500 (M)
ID: ART111277
Prijs:  £ 2.527,00
Beknopt overzicht:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
  • Onderdeelnummer:  ART111277
  • Codering:  14 bit
  • Nummerbereik:  151 - 500
  • Reflectortype:  Retroreflecterend
  • Diameter (D1):  15
Levertijd 10-15 dagen
Calibration Set for T-Nut 14 mm (0.55")
Calibration Set for T-Nut 14 mm (0.55")
ID: CALIBRATION SET 14
Prijs:  £ 445,00
Beknopt overzicht:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
  • Onderdeelnummer:  CALIBRATION SET 14
  • Bevestiging:  T-slot bevestiging
  • Diameter van de bol:  30
Op voorraad - verzending 1-2 dagen
Taper Shank CAT50
Taper Shank CAT50
ID: D28-CAT50-W
Prijs:  £ 234,00
Beknopt overzicht: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
  • Onderdeelnummer:  D28-CAT50-W
  • Interface:  D28
Levertijd 10-15 dagen
Tool Box 35.20-TB
Tool Box 35.20-TB
ID: 35.20-TB
Prijs:  £ 52,00
Beknopt overzicht:  Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
  • Onderdeelnummer:  35.20-TB
  • Compatibiliteit:  TS35.20
Op voorraad - verzending 1-2 dagen
Measuring Unit Extension (L = 450 mm / 17.72")
Measuring Unit Extension (L = 450 mm / 17.72")
ID: 41.00-VE450
Prijs:  £ 527,00
Beknopt overzicht: 

Extension made of carbon fibre, Ø25 mm, length 450 mm. Used to extend the length of measuring units on machine tools.
  • Onderdeelnummer:  41.00-VE450
  • Materiaal:  Koolstofvezel
  • Lengte:  450
  • Diameter:  25 mm
  • Mannelijke schroefdraad:  M16x1
Levertijd 10-15 dagen
Ceramic Calibration Sphere (D = 15.875 mm)
Ceramic Calibration Sphere (D = 15.875 mm)
ID: G39002200
Prijs:  £ 420,00
Beknopt overzicht: 

Calibration sphere (Ø15.875 mm) made out of ceramic with M8 thread for use on CMMs.
  • Onderdeelnummer:  G39002200
  • Materiaal van de bol:  Keramiek
  • Kogel Diameter (D):  15.875
Levertijd 10-15 dagen
Measuring Unit Extension (L = 140 mm / 5.51")
Measuring Unit Extension (L = 140 mm / 5.51")
ID: 41.00-VE140
Prijs:  £ 431,00
Beknopt overzicht: 

Extension made of carbon fibre, Ø25 mm, length 140 mm. Used to extend the length of measuring units on machine tools.
  • Onderdeelnummer:  41.00-VE140
  • Materiaal:  Koolstofvezel
  • Lengte:  140
  • Diameter:  25 mm
  • Mannelijke schroefdraad:  M16x1
Levertijd 10-15 dagen
Calibration Set for T-Nut 18 mm (0.70")
Calibration Set for T-Nut 18 mm (0.70")
ID: CALIBRATION SET 18
Prijs:  £ 455,00
Beknopt overzicht:  Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
  • Onderdeelnummer:  CALIBRATION SET 18
  • Bevestiging:  T-slot bevestiging
  • Diameter van de bol:  30
Op voorraad - verzending 1-2 dagen
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Prijs:  £ 518,00
Beknopt overzicht: 

Extension made of carbon fibre, Ø25 mm, length 115 mm. Used to extend the length of measuring units on machine tools.
  • Onderdeelnummer:  41.00-VE115
  • Materiaal:  Koolstofvezel
  • Lengte:  115
  • Diameter:  25 mm
  • Mannelijke schroefdraad:  M16x1
Levertijd 10-15 dagen
Ceramic Calibration Sphere Kit (D=15 mm, H=144-193.1-214,5 mm)
Ceramic Calibration Sphere Kit (D=15 mm, H=144-193.1-214,5 mm)
ID: G39031401
Prijs:  £ 705,00
Beknopt overzicht: 

Calibration sphere set for coordinate measuring machines (CMMs). The set includes a certified ceramic calibration sphere (Ø 15 mm) and a robust stand that allows precise positioning of the sphere at 0°, 45° and 90°. With M8 mounting for secure machine fixing.
  • Onderdeelnummer:  G39031401
  • Materiaal van de bol:  Keramiek
  • Kogel Diameter (D):  15
Levertijd 10-15 dagen
Tube Holder (Ø 0-20 mm)
Tube Holder (Ø 0-20 mm)
ID: EBD-12865
Prijs:  £ 1.591,00
Beknopt overzicht:  Fixture for securely holding tubes during measurement. Compatible with tubes up to Ø20 mm.
  • Max. Tube Diameter:  0 - 20
  • Onderdeelnummer:  EBD-12865
Levertijd > 25 dagen
Tube Holder (Ø 20-70 mm)
Tube Holder (Ø 20-70 mm)
ID: EBD-12866
Prijs:  £ 1.682,00
Beknopt overzicht:  Fixture for securely holding tubes during measurement. Compatible with tubes from Ø20 mm to Ø70 mm.
  • Max. Tube Diameter:  20 - 70
  • Onderdeelnummer:  EBD-12866
Levertijd > 25 dagen
Drawing Reading (Web Training 1 Day)
Drawing Reading (Web Training 1 Day)
ID: RE54T153-00039
Prijs:  £ 418,00
Beknopt overzicht: 

Target Group: Anyone who needs basic knowledge in reading technical drawings or needs to refresh their skills in reading technical drawings.
Course Goals: To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites: No special prerequisites are required other than computer literacy.
Other Information: To complete the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T (Web Training 1.5 Days)
GD&T (Web Training 1.5 Days)
ID: RE54T153-00032
Prijs:  £ 457,60
Beknopt overzicht: 

Target Audience: Those who need insight into form and position tolerances, such as designers, planners, production technicians, CMM operators, buyers, and salespeople.
Course Objectives: To provide insight into standards for form and position tolerances, notation, and what the requirements entail.
Prerequisites: Basic knowledge of technical drawing reading, computer literacy.
Additional Information: To complete the course, you need access to a computer and the internet.
For more information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com