text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Precio:  £ 17,00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO20/20
  • Lengte:  20 mm
  • Diameter:  20 mm
En Stock - Envío 1-2 Días
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Precio:  £ 2.504,00
Descripción rápida:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FX-GOLD/KIT
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Precio:  £ 1.198,00
Descripción rápida:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-125AL6
  • Buitendiameter klemvoet (D1):  125
  • Klembereik:  5 - 156
  • Materiaal:  Aluminium
  • Bevestiging:  M4 / M8
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Precio:  £ 3.377,00
Descripción rápida:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-240AL3
  • Buitendiameter klemvoet (D1):  240
  • Klembereik buitenzijde (A):  1 - 288
  • Klembereik binnenzijde (I):  35 - 295
  • Materiaal:  Aluminium
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Precio:  £ 1.423,00
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-160SS3
  • Buitendiameter klemvoet (D1):  160
  • Klembereik buitenzijde (A):  1 - 150
  • Klembereik binnenzijde (I):  34 - 174
  • Materiaal:  Roestvast staal
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  £ 897,00
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Onderdeelnummer:  FC-70SS3
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
En Stock - Envío 1-2 Días
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Precio:  £ 5.233,00
Descripción rápida:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Onderdeelnummer:  GB0096-2001
  • CMM compatibiliteit:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software compatibiliteit:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Afmetingen:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Kogel Diameter = 25 mm
Entrega > 25 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  £ 913,00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
En Stock - Envío 1-2 Días
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Precio:  £ 1.041,00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP400/400
  • Schroefdraad:  M8
En Stock - Envío 1-2 Días
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Precio:  £ 2.300,00
Descripción rápida:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Onderdeelnummer:  FV-FULLKIT
  • Schroefdraad:  M4
  • Toepassing:  Multisensor CMM
En Stock - Envío 1-2 Días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  £ 76,00
Descripción rápida:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Onderdeelnummer:  FX-PR30HINGE
En Stock - Envío 1-2 Días
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  £ 30,00
Descripción rápida:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Onderdeelnummer:  FX-M8SPRGNUT
En Stock - Envío 1-2 Días
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Precio:  £ 55,00
Descripción rápida:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Onderdeelnummer:  FX-SUB45/120
  • Grootte:  120 x 45 x 12 mm
En Stock - Envío 1-2 Días
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Precio:  £ 39,00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Onderdeelnummer:  FX-PR30/150
  • Grootte:  30 x 30 x 150 mm
En Stock - Envío 1-2 Días
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Precio:  27,00 €
Descripción rápida:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Onderdeelnummer:  FX-POST
  • Schroefdraad:  M8
En Stock - Envío 1-2 Días
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Precio:  1.020,00 €
Descripción rápida:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Onderdeelnummer:  FX-PILLAR/KIT
En Stock - Envío 1-2 Días
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Precio:  49,00 €
Descripción rápida:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Onderdeelnummer:  FX-PR30PLATE
  • Grootte:  130 x 30 mm
En Stock - Envío 1-2 Días
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Precio:  40,00 €
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Onderdeelnummer:  FX-PR30/100
  • Grootte:  30 x 30 x 100 mm
En Stock - Envío 1-2 Días
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Precio:  49,00 €
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Onderdeelnummer:  FX-PR30/250
  • Grootte:  30 x 30 x 250 mm
En Stock - Envío 1-2 Días
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Precio:  38,00 €
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Onderdeelnummer:  FX-PR30/50
  • Grootte:  30 x 30 x 50 mm
En Stock - Envío 1-2 Días