text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM

CMM

6-Jaw 125 Inside/Outside Clamping Set (AL)
6-Jaw 125 Inside/Outside Clamping Set (AL)
ID: FC-JS-125AL6-IE
Prijs:  € 730,00
Beknopt overzicht: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.
  • Onderdeelnummer:  FC-JS-125AL6-IE
  • Materiaal:  Aluminium, hard anodised
Levertijd 10-15 dagen
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Prijs:  € 830,00
Beknopt overzicht: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / Ø125 mm).
  • Onderdeelnummer:  FC-PS-125AL6
Levertijd 10-15 dagen
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Prijs:  € 940,00
Beknopt overzicht: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).
  • Onderdeelnummer:  FC-PS-160AL6
Levertijd 10-15 dagen
Basic Jaw Set (Aluminium)
Basic Jaw Set (Aluminium)
ID: FC-JS-240AL3-I
Prijs:  € 1.020,00
Beknopt overzicht: 

Basic jaw set made of aluminum with hard-coated surface. Compatible with 3-jaw chucks made of aluminium with Ø240 mm.
  • Onderdeelnummer:  FC-JS-240AL3-I
  • Materiaal:  Aluminium with hard coated surface
Levertijd 10-15 dagen
3-Jaw 70 Inside Clamping Set (Stainless Steel)
3-Jaw 70 Inside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-I
Prijs:  € 364,00
Beknopt overzicht: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.
  • Onderdeelnummer:  FC-JS-70SS3-I
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
6-Jaw 160 Inside/Outside Clamping Set (AL)
6-Jaw 160 Inside/Outside Clamping Set (AL)
ID: FC-JS-160AL6-IE
Prijs:  € 1.040,00
Beknopt overzicht: 

6-Jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø160 mm.
  • Onderdeelnummer:  FC-JS-160AL6-IE
  • Materiaal:  Aluminium, hard anodised
Levertijd 10-15 dagen
Reversible Top Jaw Set for Inside/Outside Clamping
Reversible Top Jaw Set for Inside/Outside Clamping
ID: FC-JS-240SS3-IE
Prijs:  € 1.120,00
Beknopt overzicht: 

Reversible top jaw set for inside and outside clamping. Made of stainless steel, vacuum hardened, ground. Compatible with 3-jaw chucks made of Aluminium with Ø240 mm.
  • Onderdeelnummer:  FC-JS-240SS3-IE
  • Materiaal:  Stainless Steel, vacuum-hardened, ground
Levertijd 10-15 dagen
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Prijs:  € 475,00
Beknopt overzicht:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Onderdeelnummer:  FX-BASIC/KIT
  • Schroefdraad:  M8
  • Toepassing:  CMM, Draagbare meetarm
Op voorraad - verzending 1-2 dagen
Standoff (D = 20 mm / L = 50 mm)
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Prijs:  € 19,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO20/50
  • Lengte:  50 mm
  • Diameter:  20 mm
Op voorraad - verzending 1-2 dagen
HR-SP-110 Rack Extension (L = 110 mm)
HR-SP-110 Rack Extension (L = 110 mm)
ID: 03969486
Prijs:  € 173,00
Beknopt overzicht:  Sensor module rack extension to lift up HR-MP racks to a total height of 200 mm. Length 110 mm.
  • Onderdeelnummer:  03969486
  • Lengte:  110
  • Diameter:  19.5
Levertijd > 25 dagen
Cleaning Putty
Cleaning Putty
ID: 03969650
Prijs:  € 18,00
Beknopt overzicht:  Putty for cleaning dust and dirt from parts, devices and measurement equipment.
  • Onderdeelnummer:  03969650
Op voorraad - verzending 1-2 dagen
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prijs:  € 52,00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Onderdeelnummer:  FV-CNRBRKT
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  € 1.004,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/400
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prijs:  € 18,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO16/20
  • Lengte:  20 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  € 84,00
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Onderdeelnummer:  FX-PR30HINGE
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  € 33,00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Onderdeelnummer:  FX-CTMED
  • Schroefdraad:  Zonder schroefdraad
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  € 819,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Onderdeelnummer:  FX-BP300/300
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prijs:  € 26,00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Onderdeelnummer:  FX-SO16/100
  • Lengte:  100 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  € 33,00
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Onderdeelnummer:  FX-M8SPRGNUT
Op voorraad - verzending 1-2 dagen
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prijs:  € 58,00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Onderdeelnummer:  FX-LATMED
  • Lengte:  20 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen