text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: FX-ARM
Prijs:  CHF142.00
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Schroefdraad:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SLIDER
Prijs:  CHF18.00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO__MAG
Prijs:  CHF18.00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lengte:  10
  • Diameter:  8
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SPRING
Prijs:  CHF46.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONE
Prijs:  CHF15.00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Schroefdraad:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3-NF
Prijs:  CHF930.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3
Prijs:  CHF940.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  70
  • Klembereik buitenzijde (A):  1 - 71
  • Klembereik binnenzijde (I):  18 - 66
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
ID: H00017063
Prijs:  CHF70.00
Beknopt overzicht:  Gigabit Ethernet to USB adaptor
  • Compatibiliteit:  Absolute Arm RA8
  • USB / LAN:  USB
  • Scannercompatibiliteit:  RS5, RS6, RS-SQUARED, HP-L-8.9
Op voorraad – Verzendtijd 1-2 dagen
ID: H00008591
Prijs:  CHF525.00
Beknopt overzicht:  Combined USB and Ethernet cable with ODU connector, length 5 m. For use with all Series 8 Absolute Arm models using Control Pack 1, 2 & 3.
  • Compatibiliteit:  Absolute Arm RA8
  • Lengte:  5
  • Stekkertype:  ODU
  • USB / LAN:  USB / LAN
  • Scannercompatibiliteit:  RS5, RS6, HP-L-8.9, RS-SQUARED
Op voorraad – Verzendtijd 1-2 dagen
ID: H00008520
Prijs:  CHF195.00
Beknopt overzicht:  USB cable with ODU connector, length 5 m. For use with all Series 8 Absolute Arm models using CP0/1/2/3.
  • Compatibiliteit:  Absolute Arm RA8
  • Lengte:  5
  • Stekkertype:  ODU
  • USB / LAN:  USB
Op voorraad – Verzendtijd 1-2 dagen
ID: H00003236
Prijs:  CHF124.00
Beknopt overzicht:  Power adapter, output AC 15V/4A. For use with all Series 8 Absolute Arm models.
  • Compatibiliteit:  Absolute Arm RA8
  • Uitgang:  AC 15 V / 4A
Op voorraad – Verzendtijd 1-2 dagen
ID: H00003263
Prijs:  CHF165.00
Beknopt overzicht:  Ethernet cable with ODU connector, length 3 m. For use with all Series 8 Absolute Arm models using CP-C or CP-W.
  • Compatibiliteit:  Absolute Arm RA8
  • Lengte:  3
  • Stekkertype:  ODU
  • USB / LAN:  LAN
  • Scannercompatibiliteit:  RS5, RS6, RS-SQUARED, HP-L-8.9
Op voorraad – Verzendtijd 1-2 dagen
ID: H00007972
Prijs:  CHF378.00
Beknopt overzicht:  Combined USB and Ethernet cable with ODU connector, length 3 m. For use with all Series 8 Absolute Arm models using Control Pack 1, 2 & 3.
  • Compatibiliteit:  Absolute Arm RA8
  • Lengte:  3
  • Stekkertype:  ODU
  • USB / LAN:  USB / LAN
  • Scannercompatibiliteit:  RS5, RS6, HP-L-8.9, RS-SQUARED
Op voorraad – Verzendtijd 1-2 dagen
ID: H00008521
Prijs:  CHF204.00
Beknopt overzicht:  Ethernet cable with ODU connector, length 5 m. For use with all Series 8 Absolute Arm models using CP-C or CP-W.
  • Compatibiliteit:  Absolute Arm RA8
  • Lengte:  5
  • Stekkertype:  ODU
  • USB / LAN:  LAN
  • Scannercompatibiliteit:  RS5, RS6, RS-SQUARED, HP-L-8.9
Op voorraad – Verzendtijd 1-2 dagen
ID: H00003230
Prijs:  CHF95.00
Beknopt overzicht:  USB cable with ODU connector, length 3 m. For use with all Series 8 Absolute Arm models using CP0/1/2/3.
  • Compatibiliteit:  Absolute Arm RA8
  • Lengte:  3
  • Stekkertype:  ODU
  • USB / LAN:  USB
Op voorraad – Verzendtijd 1-2 dagen
ID: H00006816-03
Prijs:  CHF72.00
Beknopt overzicht:  Hexagon-branded protective cover for Absolute Arm size 3.5 - 4.5 m.
  • Compatibiliteit:  Absolute Arm RA7, Absolute Arm RA8
  • Aanbevolen Arm grootte:  3,5 - 4,5
Op voorraad – Verzendtijd 1-2 dagen
ID: H00006816-02
Prijs:  CHF63.00
Beknopt overzicht:  Hexagon-branded protective cover for Absolute Arm size 2.5 - 3.0 m.
  • Compatibiliteit:  Absolute Arm RA7, Absolute Arm RA8
  • Aanbevolen Arm grootte:  2,5 - 3,0
Op voorraad – Verzendtijd 1-2 dagen
ID: H00006817
Prijs:  CHF77.00
Beknopt overzicht:  Hexagon-branded protective cover for Absolute Arm size 1.2 m.
  • Compatibiliteit:  Absolute Arm RA7, Absolute Arm RA8
  • Aanbevolen Arm grootte:  1,2
Op voorraad – Verzendtijd 1-2 dagen
ID: H00006816-01
Prijs:  CHF74.00
Beknopt overzicht:  Hexagon-branded protective cover for Absolute Arm size 1.5 - 2.0 m.
  • Compatibiliteit:  Absolute Arm RA7, Absolute Arm RA8
  • Aanbevolen Arm grootte:  1,5 - 2,0
Op voorraad – Verzendtijd 1-2 dagen
ID: H00000383-16
Prijs:  CHF510.00
Beknopt overzicht:  180 mm carbon probe with glue-mounted stainless steel ball Ø15 mm. For use with all Absolute Arm models.
  • Kogel diameter:  15
  • Lengte:  180
  • Tasterverbinding:  TKJ mannetje
Op voorraad – Verzendtijd 1-2 dagen